Vickers | DG4V32NMUH760EN38
DG4V32NMUH760EN38
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V32NMUH760EN38 directional valve belongs to the DG4 Directional Valves series from Vickers and is applied to shift flow paths in automated hydraulic circuits. It is energized at 24 VDC so low-voltage control panels can drive the solenoid directly. The coil draws 30 W, which defines the electrical load that must be supplied by the power source. A continuous duty rating of 100 % ED permits the solenoid to remain powered indefinitely without thermal cycling. Connection is made through an ISO 4400 (DIN 43650) connector, giving quick detachment for service while preserving pin compatibility across devices. Because the valve is built without an indicator light, position feedback must be taken from external sensors or system pressure checks. A plain manual override lets technicians shift the spool by hand during setup or when electrical power is absent. The maximum flow capacity of 80 L/min sets the limit for actuator speed calculations, and the ISO 4401-AB-03-4-A mounting interface allows the body to bolt to standard subplates in a manifold stack.
Ingress protection to IP67 prevents dust entry and allows temporary immersion, supporting mobile or wash-down installations. Compatibility with petroleum oils confines the fluid selection to common mineral-based hydraulic mediums, and cleanliness code 19/17/14 specifies the particle level that must be maintained by filtration to protect the spool lands from abrasion. The work ports can withstand up to 350 bar (5000 psi), enabling high-pressure cylinders or motors, while the tank port is limited to 210 bar (3000 psi) to safeguard return-line components. A length of 6.140 in fits shallow manifolds, a height of 3.420 in leaves room for wiring above the coil, and a width of 1.800 in provides a narrow footprint so multiple valves can be arrayed side by side on a common block.
Technical Specifications
Coil Power
30 W
Duty Cycle
100% ED
Electrical Connection
ISO 4400 (DIN 43650)
Fluid Cleanliness Code
19/17/14
Fluid Compatibility
Petroleum Oils
Indicator Light
No
Ingress Protection
IP67
Manual Override
Plain
Max Flow Rate
80 L/min
Max Port P/a/b Pressure
350 bar (5000 psi)
Max Tank Port Pressure
210 bar (3000 psi)
Mounting Interface
ISO 4401-AB-03-4-A
Product Height
3.420 in
Product Length
6.140 in
Product Width
1.800 in
Rated Voltage
24 VDC
1620 Old Apex Road
Shipping & Payment Options
