Vickers | DG4V32NMUC660
DG4V32NMUC660
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V32NMUC660 directional valve belongs to the DG4 Directional Valves series and is produced by Vickers. It routes hydraulic oil in automated circuits by shifting a solenoid-driven spool between flow paths. The solenoid actuation allows remote electrical control, and the coil is rated for 220 VAC at 50 Hz to match common plant power. When the spool rests in its closed center configuration, all ports are blocked to stop flow and hold pressure. The valve handles up to 350 bar working pressure for high-pressure systems and passes a nominal 80 L/min to support medium-flow actuators. A power draw of 54 VA defines the electrical load seen by control cabinets. The ISO 4401-03 (CETOP 3) interface lets the unit bolt directly onto standardized subplates, while compatibility with petroleum oils ensures it can be installed in conventional mineral-oil circuits.
A no-spring detented mechanism keeps the spool in its last energized position until another signal is applied, which aids circuits that require maintained flow without continuous power. A plain manual override permits local shifting during commissioning or power loss. Wiring is completed through an ISO 4400 (DIN 43650) connector, easing field replacement of coils. Operation demands oil cleanliness at ISO 19/17/14, limiting particulate wear in the spool bore. The absence of a spool position monitor means external sensors are needed if feedback is required. Overall length of 5.750 in, width of 1.800 in, and height of 3.420 in define the envelope for manifold layouts and stacking clearances. These dimensions, together with the specified features, support compact hydraulic automation designs while maintaining reliable directional control. This size profile eases installation in multi-valve stacks where envelope conflicts are common.
Technical Specifications
Actuation Type
Solenoid Operated
Center Condition
Closed Center
Coil Rating
220 VAC 50 Hz
Detent Type
No-Spring Detented
Electrical Connection
ISO 4400 (DIN 43650)
Fluid Cleanliness
19/17/14
Fluid Compatibility
Petroleum Oils
Height
3.420 in
Interface
ISO 4401-03 (CETOP 3)
Length
5.750 in
Manual Override
Plain
Max Working Pressure
350 bar
Power Consumption
54 VA
Rated Flow
80 L/min
Spool Position Monitor
No
Width
1.800 in
1620 Old Apex Road
Shipping & Payment Options
