Vickers | DG4V32NMFTWB660
DG4V32NMFTWB660
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V32NMFTWB660 valve belongs to the DG4 Directional Valves series and is produced by Vickers to shift flow paths in automated hydraulic manifolds. The solenoid coil is rated for 110 VAC at 50 Hz or 120 VAC at 60 Hz, allowing direct connection to common industrial power networks. Electrical input is routed through a terminal block so panel wiring can be landed without soldered joints, and a 1/2 in NPT wiring thread seals the conduit entry to keep moisture out. The valve mounts on an ISO 4401-03 interface, simplifying interchange with standard subplates. Internal actuation uses spool type 2 to establish the required porting pattern, and movement is maintained by a no-spring detented arrangement that holds the selected position after power is removed. Manual intervention is provided through a plain override so maintenance staff can stroke the spool during commissioning or in the event of power loss. Pressure limits reach 350 bar at the P, A, and B ports while the tank port is limited to 210 bar, supporting medium-to-high pressure circuit designs.
The unit accommodates petroleum oils as the working fluid and requires cleanliness equal to ISO 4406 code 19/17/14 to prevent wear of the metering edges. Nominal flow capability is 80 l/min, which matches many mid-size actuator circuits without excessive pressure drop. Continuous service is permitted up to 70 °C fluid temperature, maintaining seal integrity under elevated heat. Overall length is 5.750 in, width is 1.880 in, and height is 3.570 in, dimensions that fit compact manifolds and ease retrofit into existing envelopes. These physical values simplify manifold layout and allow closely spaced valve banks, ensuring the valve can be installed where stable directional control and straightforward service access are required.
Technical Specifications
Coil Rating
110 VAC 50 Hz/120 VAC 60 Hz
Electrical Connection
Terminal Block
Fluid Cleanliness
ISO 4406 19/17/14
Fluid Compatibility
Petroleum Oils
Height
3.570 in
Interface
ISO 4401-03
Length
5.750 in
Manual Override
Plain
Max Flow
80 l/min
Max Pressure (p/a/b)
350 bar
Spool Type
2
Spring Arrangement
No Spring Detented
Tank Port Rating
210 bar
Width
1.880 in
Wiring Thread
1/2 in NPT
Working Temp Max
70 C
1620 Old Apex Road
Shipping & Payment Options
