Vickers | DG4V32NMFPA5WLD1HL760EN38
DG4V32NMFPA5WLD1HL760EN38
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V32NMFPA5WLD1HL760EN38 valve belongs to the DG4 Directional Valves series and is produced by Vickers for controlling flow direction in hydraulic automation systems. Its ISO 4401-03 mounting interface mates with CETOP 3 / NFPA D03 subplates to simplify manifold construction. The spool holds a closed center position so all ports are blocked when the solenoid is idle, isolating actuators during standby. Pressure capability reaches 350 bar on the P, A, and B ports, while the T port is limited to 210 bar for safe tank return service. The solenoid draws 30 W in direct-current operation and can run continuously at a 100 percent duty cycle to meet demanding machine cycles. A minimum supply of 90 percent of nominal voltage still shifts the spool, providing tolerance for line drops. Class H winding insulation withstands elevated temperatures, and the encapsulation is built to Class F to protect the coil against moisture and vibration.
Electrical terminations are arranged through an Insta-Plug five-pin connector, and the coil is supplied with flying leads to accommodate flexible routing inside control enclosures. A 1/2 in NPT conduit entry safeguards the wiring against abrasion and fluid exposure. The solenoid reaches full stroke within 60 ms when energized and returns within 40 ms when de-energized at 20 l/min and 175 bar, enabling precise directional changes in rapid-cycling equipment. These response times help limit pressure overshoot and improve positioning accuracy in servo-controlled actuators. Fluid cleanliness must be maintained at ISO 4406 code 19/17/14 to avoid spool sticking and premature wear. M5-0.8 mounting bolts secure the body to the subplate and preserve alignment under hydraulic shock.
Technical Specifications
Center Condition
Closed Center (All Ports)
Cleanliness Requirement
ISO 4406 19/17/14
Coil Encapsulation
Class F
Coil Power (dc)
30 W
Coil Type
Flying Lead (F)
Coil Winding Insulation
Class H
Conduit Thread
1/2 NPT (W)
Dc De-energize Response
40 ms (20 l/min, 175 bar)
Dc Energize Response
60 ms (20 l/min, 175 bar)
Duty Cycle
100% ED (Continuous)
Electrical Connector
Insta-Plug 5-Pin (PA5)
Max Pressure (p,a,b)
350 bar (5000 psi)
Minimum Supply Voltage
90% of rated
Mounting Bolt Thread
M5-0.8
Mounting Interface
ISO 4401-03 (CETOP 3, NFPA D03)
T Port Pressure
210 bar (3000 psi)
1620 Old Apex Road
Shipping & Payment Options
