Vickers | DG4V32NMFPA5WLD1H760
DG4V32NMFPA5WLD1H760
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V32NMFPA5WLD1H760 directional valve is manufactured by Vickers for the DG4 Directional Valves series. The device directs hydraulic flow in automated circuits through a two-position closed-center spool that blocks all ports when neutral to hold actuator position. A maximum working pressure of 350 bar on ports P, A, and B allows the valve to operate in high-pressure mobile or industrial systems, while a maximum flow rate of 40 l/min matches small to medium pump outputs. Installation is simplified by an ISO 4401-03 (CETOP 3) mounting interface that aligns with common subplates. The solenoid is rated for 24 VDC, and the coil maintains operation down to 90 percent of that voltage so control systems can tolerate modest supply drops. Continuous duty at 100 percent enables the valve to remain energized without overheating, and a 30 W power draw keeps panel supply requirements moderate.
Class H insulation on the coil withstands elevated winding temperatures that arise during sustained service. Electrical hookup is provided through a 5-pin receptacle, and a 1/2 inch NPT thread on the wiring housing admits standard conduit for field routing. The enclosure carries an IP67 rating so the assembly resists dust ingress and temporary immersion, supporting outdoor machinery. Clean hydraulic oil to ISO 4406 19/17/14 is required to maintain spool clearance and prevent wear. Energization takes 60 ms, permitting rapid actuator start, while de-energization completes in 40 ms for quick stop commands. The tank port tolerates 210 bar, letting designers route case drain or back-pressure circuits without risk of seal damage. Together these features make the valve suitable for precise, reliable directional control in automated hydraulic equipment.
Technical Specifications
Coil Insulation Class
Class H
Coil Voltage
24 VDC
Duty Cycle
100%
Electrical Connector
5-Pin Receptacle
Fluid Cleanliness
ISO 4406 19/17/14
Ingress Protection
IP67
Max Flow Rate
40 l/min
Max Tank Port Pressure
210 bar
Max Working Pressure (p,a,b)
350 bar
Minimum Supply Voltage
90% Rated
Mounting Interface
ISO 4401-03 (CETOP 3)
Power Consumption
30 W
Response Time (de-energize)
40 ms
Response Time (energize)
60 ms
Spool Type
2 (Closed Center)
Wiring Housing Thread
1/2 in NPT
1620 Old Apex Road
Shipping & Payment Options
