DG4V32CMUA660

The DG4V32CMUA660 valve belongs to the DG4 Directional Valves series from Vickers and directs hydraulic flow in automated machinery. It is solenoid operated, allowing the spool to shift by electrical command instead of manual levers. A coil rated at 110 VAC 50 Hz connects to common mains supplies, and the 54 VA power draw limits load on smaller control transformers. Wiring is completed through an ISO 4400 (DIN 43650) connector, simplifying field replacement. A plain manual override lets technicians move the spool during setup or when power is unavailable. The design omits an indicator light, removing extra conductors that could complicate hazardous-area installations. Mounting follows the ISO 4401-03 interface so the valve fits standard subplates without adapter blocks. With a body length of 7.870 in, it occupies minimal manifold space.

The valve supports operating pressures up to 350 bar, making it suitable for high-pressure circuits such as presses and plastic molding systems. It passes a nominal flow of 80 L/min, equal to 21.0 gpm, which sustains moderate actuator speeds without excessive pressure drop. Petroleum oils are the approved working fluid, and the cleanliness must be maintained at 19/17/14 to protect the spool lands from contamination-induced wear. Overall height is 3.420 in, allowing close stacking under low hood clearances. No indicator light is present, so status feedback must be supplied by external sensors if required. A plain manual override remains available for emergency actuation, and the ISO 4400 connector continues to provide quick solenoid replacement. These characteristics align the DG4V32CMUA660 with mid-range hydraulic automation duties where reliable directional control, standard electrical interfaces, and compact dimensions are essential.