Vickers | DG4V32AMUB660
DG4V32AMUB660
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V32AMUB660 directional valve belongs to the DG4 Directional Valves series from Vickers and routes hydraulic flow in automated machinery. It uses spool type 2 with a closed center to block all ports when the solenoid is de-energized, while spring arrangement A provides an end-to-end offset that returns the spool to its reference position after actuation. Installation follows the ISO 4401-03 mounting interface, and the subplate employs the ISO 4401-AB-03-4-A port pattern for manifold interchangeability. Assembly screws engage an M5-0.8-6H mounting bolt thread to secure the body on CETOP 3 bases. A plain manual override at the solenoid end lets technicians shift the spool during commissioning or power loss. Electrical connection is handled by a U-type coil that mates with ISO 4400 / DIN 43650 connectors.
Class F coil encapsulation and Class H insulation allow continuous duty at 100 % ED without thermal degradation. The valve accepts supply variations down to 90 % of nominal voltage, maintaining reliable force on the armature. When energized, it reaches the open position in 60 ms and releases in 40 ms, figures suited to medium-speed motion cycles. Ports P, A, and B tolerate system pressures up to 350 bar (5000 psi), enabling control of high-pressure circuits common in presses and injection equipment. These characteristics provide predictable response, long service life, and straightforward integration in hydraulic automation lines.
Technical Specifications
Coil Encapsulation
Class F
Coil Insulation Class
Class H
Coil Type
U (ISO 4400/DIN 43650)
Duty Cycle
Continuous (ED 100%)
Manual Override
Plain (Solenoid End)
Max Pressure (p, A, B)
350 bar (5000 psi)
Mounting Bolt Thread
M5-0.8-6H
Mounting Interface
ISO 4401-03 (CETOP 3/NFPA D03)
Permissible Voltage Minimum
90% Rated
Port Pattern
ISO 4401-AB-03-4-A
Response Time (off)
40 ms
Response Time (on)
60 ms
Spool Type
2 (Closed Center)
Spring Arrangement
A (Spring Offset End-To-End)
1620 Old Apex Road
Shipping & Payment Options
