DG4V32ALMUH760EN76

The DG4V32ALMUH760EN76 valve belongs to the DG4 Directional Valves series and is built by Vickers for electrically controlled hydraulic circuits. It is solenoid operated, so the spool shifts when a current is applied instead of relying on pilot pressure. The coil is designated as type U according to DIN 4400, giving the assembly a standardized winding and enclosure. A 24 VDC coil voltage lets the unit tie directly into common machine control power without transformers, and the 30 W power consumption defines the load placed on the supply. An ISO 4400 (DIN 43650) connector is fitted to simplify plug-in wiring on the manifold. A plain manual override is present for commissioning or emergency movement when power is absent. The spool has arrangement A with a spring offset that returns it to its normal porting once the solenoid is de-energized. Left-hand build orientation (AL) positions the pressure and tank ports on the left side of the mounting face.

The valve manages a continuous flow of 80 L/min, making it suitable for medium-rate actuator circuits. It withstands a maximum operating pressure of 350 bar (5000 psi) on the pressure port, while the tank port rating of 207 bar (3000 psi) protects the return line components. An ISO 4401-03, also known as CETOP 3, mounting interface allows the body to bolt onto standard subplates without adapter blocks. The design is intended for use with petroleum-based hydraulic oils, and the cleanliness level must be maintained at 19/17/14 or better to limit wear in the spool lands. Required filtration complements the internal clearances to preserve accurate metering. The valve distributes flow in automated equipment where these pressure limits and cleanliness standards are met, ensuring reliable motion control across cylinders or motors connected to the manifold.