Vickers | DG4V30BPLT10LHJAS310
DG4V30BPLT10LHJAS310
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V30BPLT10LHJAS310 directional valve is produced by Vickers within the DG4 Directional Valves series and is intended to route pressurized fluid in hydraulic automation loops. It mounts on an ISO 4401-AB-03-4-A subplate, matching Cetop size 3 and NFPA size D03 footprints so installers can interchange it with standard modular hardware. Secure attachment is achieved with M5-0.8-6H or 10-24 UNC-2B screws tightened to 4.5–6.0 N·m (40–50 lbf·in), preventing leakage under load. The valve accepts line pressures of up to 350 bar (5000 psi) at ports P, A, and B, while the tank port is limited to 210 bar (3000 psi) to protect return plumbing. Electrical actuation is available at either 12 Vdc or 24 Vdc, and each coil draws 30 W, allowing designers to select a supply voltage without changing heat dissipation. These structural and power characteristics define how the unit integrates mechanically and electrically within a manifold block or machine frame.
The wet armature solenoid design keeps moving parts immersed in oil, which dampens noise and extends service life during the specified 100 % ED continuous duty cycle. When a coil is energized the spool shifts in about 60 ms, and it returns in roughly 40 ms after power removal; these response times aid predictable machine sequencing. An ingress protection rating of IP67 is achieved when the ISO 4400 plug is fitted, allowing temporary submersion during wash-down without water ingress to the coil cavity. With a single solenoid the assembly weighs 1.6 kg, and the double-solenoid configuration increases mass to 2.2 kg, data needed for manifold support calculations. These operational figures complete the technical profile and allow system designers to predict thermal load, mass, and enclosure sealing when the valve is installed.
Technical Specifications
Cetop Size
3
Coil Power (12 Vdc)
30 W
Coil Power (24 Vdc)
30 W
Duty Cycle
100% ED (Continuous)
Ingress Protection
IP67 (with ISO 4400 plug)
Max Tank Line Pressure
210 bar (3000 psi)
Mounting Bolt Thread
M5-0.8-6H (10-24 UNC-2B)
Mounting Bolt Torque
4.5–6.0 N·m (40–50 lbf·in)
Mounting Interface
ISO 4401-AB-03-4-A
Nfpa Size
D03
Rated Pressure (p/a/b)
350 bar (5000 psi)
Solenoid Type
Wet Armature
Typical De-energize Time
40 ms
Typical Energize Time
60 ms
Weight (double Solenoid)
2.2 kg
Weight (single Solenoid)
1.6 kg
1620 Old Apex Road
Shipping & Payment Options
