Vickers | DG4V30BLMFPM4WLD7H760EN623
DG4V30BLMFPM4WLD7H760EN623
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V30BLMFPM4WLD7H760EN623 valve belongs to the DG4 Directional Valves series and is produced by Vickers for hydraulic automation circuits that require controlled flow direction. It is solenoid operated so the spool shifts electrically rather than by pilot pressure. The coil is rated at 24 V DC, which allows direct connection to common machine control power supplies. During energization the device draws 30 W, a value engineers use to size power outputs and thermal dissipation. An indicator light is included to show coil energization status at a glance. Termination is made with a 4-pin Brad Harrison connector, enabling quick plug-in wiring during installation. A plain manual override lets maintenance staff move the spool without electrical power. The valve mounts on an ISO 4401-03 interface so it fits standard sub-plates. It is built as a single stage unit, eliminating the need for a separate pilot section in compact manifolds.
The valve handles system pressures up to 350 bar, supporting high-pressure circuits in industrial machinery. A maximum flow capacity of 80 L/min defines the allowable pump delivery without causing excessive pressure drop. Viton seals are used to retain hydraulic fluid at elevated temperatures and resist chemical attack. The internal passages are intended for petroleum oils, matching common hydraulic fluids found in plant equipment. Cleanliness requirements are set to code 19/17/14, indicating the particle limits necessary for reliable operation. The spring arrangement is offset to center on the left side so the spool returns to center from a displaced position once power is removed. There is no spool position monitor, so external sensors would be required if position feedback is needed.
Technical Specifications
Actuation Type
Solenoid Operated
Cleanliness Code
19/17/14
Coil Voltage
24 VDC
Electrical Connection
4-Pin Brad Harrison Connector
Fluid Compatibility
Petroleum Oils
Indicator Light
Yes
Interface
ISO 4401-03
Manual Override
Plain
Max Flow
80 L/min
Power Consumption
30 W
Pressure Rating
350 bar
Seal Material
Viton
Spool Position Monitor
No
Spring Arrangement
Offset To Center (LH)
Stage
Single Stage
1620 Old Apex Road
Shipping & Payment Options
