Vickers | DG4V-3S-60-M-FW-D5-60-EN21
DG4V-3s-60-M-FW-D5-60-EN21
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V-3s-60-M-FW-D5-60-EN21 belongs to the DG4 Directional Valves series from Vickers and directs hydraulic flow for automated actuators. Its solenoid coil is supplied with flying leads, allowing direct connection to terminal blocks where plug connectors are impractical. A 1/2 NPT conduit thread secures the incoming cable in standard electrical conduit systems. The coil accepts a DC power supply, and a relative duty factor of 100 % ED permits continuous energization without thermal derating. A plain manual override located at the solenoid end lets maintenance staff shift the spool during setup or when power is lost. The valve tolerates 350 bar on ports P, A, and B, while the tank port withstands 100 bar, making the unit suitable for high-pressure mobile or industrial circuits.
The unit follows a subplate mounting style and mates with the ISO 4401-AB-03-4-A interface so it can be installed on any matching manifold block. This interface also aligns with the CETOP 3 (NFPA D03) port pattern, ensuring interchangeability across common hydraulic platforms. Four mounting holes with a 5.6 mm diameter accommodate cap screws, and each screw must achieve at least 10 mm of thread engagement to hold the valve securely against the subplate. Internal galleries open to system ports that measure 7.9 mm in diameter to balance flow capacity with manageable pressure drop. These mechanical details allow quick replacement in the field while maintaining the pressure ratings stated earlier.
Technical Specifications
Coil Type
Flying Lead (F)
Conduit Thread
1/2 NPT (W)
Manual Override
Plain (Solenoid End)
Max Operating Pressure (p, A, B)
350 bar (5000 psi)
Max Tank Port Pressure
100 bar (1450 psi)
Mounting Hole Diameter
5.6 mm
Mounting Interface
ISO 4401-AB-03-4-A
Mounting Style
Subplate Mounted
Port Interface Size
CETOP 3 (NFPA D03)
Power Supply Type
DC
Relative Duty Factor
100% ED
System Port Diameter
7.9 mm
Thread Engagement (min)
10 mm
1620 Old Apex Road
Shipping & Payment Options
