Vickers | DG4V-3S-2N-M-FPBWL-B5-60
DG4V 3S 2N M FPBWL B5 60
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V 3S 2N M FPBWL B5 60 directional valve belongs to the DG4 Directional Valves series produced by Vickers for hydraulic automation where controlled flow direction is required. It is built as a single-stage unit so flow is guided by a single spool without a pilot section. The valve size is D03, matching compact manifold cavities used in small to medium power packs. An ISO 4401-03 (CETOP 3) mounting interface lets the body bolt directly to standardized subplates for quick changeover. A gray iron housing supplies the strength and vibration damping needed for frequent cycling. The assembly weighs 4.4 lb, allowing installers to position it by hand on crowded machinery. A width of 1.8 in supports dense manifold layouts, while the 3.57 in height keeps the center of gravity low on the subplate. Overall length is 5.75 in, giving room for internal passages yet preserving a compact envelope.
The valve carries a nominal flow rating of 80 l/min so medium duty cylinders can extend and retract at required speeds. Maximum pressure at the P, A, and B ports is 350 bar, allowing operation in high-pressure circuits, and the tank port tolerates 100 bar to accommodate controlled back-pressure. The solenoid coil accepts 110 VAC at 50 Hz or 120 VAC at 60 Hz, enabling use on standard plant power. A 1/2 in NPT conduit box encloses the coil to protect wiring and provide a rigid conduit entry. Electrical hookup is completed with an Instaplug male/female pair in the same 1/2 in NPT housing, which shortens service time. Buna-N seals resist petroleum-based hydraulic oil and help prevent leakage. Gauge ports are tapped 7/16-20 UNF under the SAE pattern so technicians can connect pressure instruments without special adapters.
Technical Specifications
Body Material
Gray Iron
Coil Type
1/2 in NPT Conduit Box
Coil Voltage
110 VAC 50 Hz/120 VAC 60 Hz
Electrical Connector
Instaplug M/F, 1/2 in NPT Housing
Flow Rating
80 l/min
Gauge Port Thread
7/16-20 UNF (SAE)
Height
3.57 in
Length
5.75 in
Max Port Pressure (p/a/b)
350 bar
Mounting Interface
ISO 4401-03 (CETOP 3)
Seal Material
Buna-N
Stage
Single Stage
Tank Port Rating
100 bar
Valve Size
D03
Weight
4.4 lb
Width
1.8 in
1620 Old Apex Road
Shipping & Payment Options
