Vickers | DG4V-3S-22AL-M-FW-B5-60
DG4V-3S-22AL-M-FW-B5-60
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V-3S-22AL-M-FW-B5-60 valve belongs to the DG4 Directional Valves series from Vickers and directs hydraulic fluid in automated machinery. It employs a closed-center two-way spool so all ports are blocked when the coil is de-energized, maintaining circuit pressure until motion is commanded. Installation is simplified by a manifold interface machined to the ISO 4401-03 (CETOP 3, NFPA D03) pattern, and the single-solenoid unit weighs 1.6 kg to reduce load on the subplate. A wet armature solenoid limits wear by immersing moving parts in fluid, while a direct-current supply energizes the coil that consumes 30 W under steady load. Continuous operation is supported by a 100 % duty cycle, and the left-hand spring offset automatically returns the spool to its fail-safe position. Electrical leads exit as flying conductors, and the housing provides a 1/2 NPT threaded entry for conduit or flexible tubing.
For pressure control, ports P, A, and B are rated up to 350 bar (5075 psi), while the tank port tolerates 100 bar (1450 psi), allowing the valve to handle high-energy circuits without external relief devices. Flow capability reaches 40 l/min (10.5 US gpm) so medium-size actuators can be driven without excessive pressure drop. Response is predictable because the armature typically energizes in 60 ms and releases in 40 ms, enabling repeatable cycle timing in sequenced automation. These pressure, flow, and timing figures define the operational envelope engineers rely on when integrating the DG4V-3S-22AL-M-FW-B5-60 into industrial hydraulic systems.
Technical Specifications
Approximate Mass
1.6 kg (single solenoid)
Coil Power
30 W
Coil Supply Type
DC
Coil Type
Flying Leads (F)
Duty Cycle
100% ED
Max Pressure (p/a/b)
350 bar (5075 psi)
Max Pressure (t)
100 bar (1450 psi)
Maximum Flow
40 l/min (10.5 US gpm)
Mounting Pattern
ISO 4401-03 (CETOP 3, NFPA D03)
Solenoid Type
Wet Armature
Spool Pattern
Closed Center (Two-Way)
Spring Arrangement
Spring Offset (Left-Hand)
Typical Dropout Time
40 ms
Typical Energize Time
60 ms
Wiring Housing Thread
1/2 NPT (W)
1620 Old Apex Road
Shipping & Payment Options
