DG4V-3-6C209-M-FPA5WL-HH7-60

The DG4V-3-6C209-M-FPA5WL-HH7-60 valve belongs to the DG4 Directional Valves series and is manufactured by Vickers for automated hydraulic circuits. The spool type 6 blocks the pump port while connecting both actuator ports to tank, providing a safe neutral condition during standby. A spring-centered C arrangement recenters the spool when the solenoid is de-energized, preventing drift in actuator position. The ISO 4401-03 (CETOP 3) mounting interface enables direct installation on standardized subplates to streamline manifold layouts. Maximum pressure of 350 bar (5075 psi) on the pressure and work ports allows operation in high-pressure systems without derating. The tank port rating of 207 bar (3000 psi) defines the allowable back pressure so return-line components may be selected correctly. A 24 VDC coil voltage integrates with common machine-level control power supplies.

The solenoid draws 30 W, a consumption level that helps specify the power supply and thermal load in the electrical cabinet. A flying lead coil simplifies direct field termination where plug-in connectors are not preferred. When a detachable interface is required, the 5-pin receptacle provides a structured connection point for power and pilot signals. The wiring housing is tapped with a 1/2 in NPT thread so conduit or cord grips can be attached for environmental protection. Continuous duty at ED 100 % lets the solenoid remain energized indefinitely without exceeding its temperature rise limits. Design number 60 identifies the current engineering release, ensuring replacement parts match form and function with earlier assemblies.