Vickers | DGMPC-7-BAK-20
DGMPC 7 BAK 20
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DGMPC 7 BAK 20 is produced by Vickers and belongs to the Check Valves series where it prevents reverse flow in hydraulic automation circuits. It uses pressure-operated actuation so the poppet opens only after system pressure reaches a defined level, keeping lines isolated under standby conditions. The valve handles up to 315 bar, making it suitable for medium-pressure manifolds, and it supports a continuous flow of 180 L / min to match common pump outputs. Installation is subplate or manifold mounted, and the mounting face follows the ISO 4401-03 pattern for interchangeability with other D03 components. A cast-iron body provides structural strength, while Buna-N seals contain mineral-based fluids without external leakage. Overall configuration conforms to D03 size envelopes, allowing straightforward stacking in modular valve banks.
The unit weighs 16.5 lb, so a single installer can position it without lifting gear, and its rectangular housing measures 7.91 in in length, 3.15 in in width, and 3.54 in in height to fit standard hydraulic plates. Fluid cleanliness should not exceed 19/17/14 according to ISO particle counting to maintain poppet seating accuracy, and the internal passages are compatible with anti-wear hydraulic oil used in industrial power units. Continuous operation is specified between −20 °C and 80 °C, ensuring reliable sealing during cold starts and sustained high-temperature cycles. These dimensional, cleanliness, and temperature limits define the service envelope for system designers selecting this valve for automated presses, molding machines, or test stands.
Technical Specifications
Actuation Type
Pressure Operated
Body Material
Cast Iron
Flow Rate
180 L/min
Fluid Cleanliness
19/17/14 micron
Fluid Compatibility
Anti-Wear Hydraulic Oil
Height
3.54 in
Interface
ISO 4401-03
Length
7.91 in
Pressure Rating
315 bar
Seal Material
Buna-N
Size
D03
Valve Mount Type
Subplate/Manifold Mounted
Weight
16.5 lb
Width
3.15 in
Working Temperature Max
80 °C
Working Temperature Min
-20 °C
1620 Old Apex Road
Shipping & Payment Options
