180L1029

The 180L1029 solenoid valve is part of the VDHT Solenoid Valves series produced by Danfoss for automated hydraulic control systems. Its BSP connection standard matches common European pipe threads, simplifying assembly with existing fittings. The designated mounting direction is manifold, so the body drops directly into a valve block and eliminates external tubing. A valve function of 1 normally closed keeps the passage shut when the coil is de-energized, isolating downstream circuits until a control signal is applied. Both the inlet and outlet ports measure 1 in, offering symmetrical flow paths and straightforward line sizing. Inside the body, a 35 mm piston provides the required actuation area to overcome pressure forces while maintaining a tight seal during repeated on-off cycles.

The hydraulic capacity of the 180L1029 is defined by a maximum flow rate of 150 l/min, allowing it to serve cylinders, motors, or accumulators that demand moderate volume without excessive pressure drop. The valve withstands working pressures up to 210 barg, so it can be placed in high-pressure supply manifolds found in mobile or industrial equipment. Media temperatures can reach 90 °C, enabling the unit to handle warmed oils that arise from continuous duty or elevated ambient conditions without loss of sealing integrity. These operating limits confirm compatibility with a broad range of hydraulic fluids and ensure the valve maintains predictable response and service life within demanding automation schemes.