180L1024

The 180L1024 solenoid valve belongs to the VDHT Solenoid Valves series from Danfoss and is applied in hydraulic automation where electrical signals must open or close oil passages. The unit is configured for manifold mounting, which lets designers stack it directly into a common block without external tubing. Its BSP connection standard streamlines coupling to British Standard Pipe threaded ports used widely in mobile and industrial hydraulics. Both the inlet and outlet are sized at 3/4 in, giving straightforward alignment with mid-range hose or hard-line sizes. A maximum flow rate of 120 l/min supports steady actuator motion in medium-capacity circuits while keeping velocity within safe limits. The internal piston measures 35 mm in diameter, setting a defined area that determines the force produced by the magnetic coil and therefore the switching speed of the valve.

The valve tolerates operating pressures up to 140 bar g, so it withstands typical pump outputs found in compact power packs without risk of deformation. Media temperatures can reach 90 °C, allowing the component to handle warmed hydraulic oil generated during continuous duty cycles. An internal volume of 3.43 L provides a known cavity size that helps system designers calculate fluid displacement during actuation. The net weight of 4.4 kg keeps installation manageable for a single technician, while the gross shipping weight of 4.816 kg accounts for packaging and facilitates logistics planning. These characteristics combine to deliver a solenoid valve that integrates neatly into manifold systems and maintains performance under demanding hydraulic operating conditions.