180L1011

The 180L1011 solenoid valve is built by Danfoss as part of the VDHT Solenoid Valves series. It is intended to start and stop hydraulic flow in automated circuits. The valve follows the BSP connection standard, allowing direct installation on equipment that uses British Standard Pipe threads. Both the inlet and outlet ports are 1 in, which simplifies line design when equal pipe sizes are preferred. A 2/2 way configuration means the device has two ports and two switching positions, so it either permits or blocks flow with a straightforward on-off function. The piston inside the body measures 35 mm in diameter; this area sets the force balance between solenoid actuation and line pressure. Flow is directed through a manifold mounting face, letting designers stack multiple functions on a common block and minimize external tubing.

The maximum operating pressure is 140 barg, enabling the valve to handle high-pressure hydraulic supplies without leakage. A peak flow rate of 150 l/min defines the highest volume it can pass while maintaining acceptable pressure drop. The valve tolerates media temperatures up to 90 °C, so it can be used with warm oils found in mobile and industrial power units. Net weight is 6.819 kg, providing a stable mass that resists vibration when the unit is fastened to a manifold. These ratings maintain predictable performance during rapid cycling in automation systems that rely on fast solenoid response. The pressure and temperature limits together support use in circuits where fluid conditions fluctuate during duty cycles. Capacity figures let system designers size pumps and accumulators with clear margins for dynamic events.