1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com
You will get an email confirming we have received your inquiry.
A team member will review your request and be in touch concerning any questions or specifications.
You will receive a comprehensive quote tailored to your specific needs.
The 180L0244 solenoid valve belongs to the VDHT Solenoid Valves series and is manufactured by Danfoss for automated hydraulic flow control. It uses a 2/2-way configuration that allows fluid to pass straight through the body, and the valve is normally open so flow continues until the coil is energized. The defined pressure direction is Pin to Pout, guiding installers on inlet and outlet orientation. A nominal flow capacity of 15 l/min supports moderate-duty circuits, while a minimum operating pressure of 0.3 barg ensures reliable actuation at low system pressures. The assembly tolerates pressures up to 100 barg, covering a wide range of industrial lines, and it handles fluids with viscosities up to 45 mm²/s without performance loss. The housing weighs 0.6 kg without the coil, helping to reduce manifold mass.
The valve operates with media between 2 °C and 90 °C, matching common hydraulic oil temperature bands. A pilot supply must deliver at least 1 l/min so the internal piston can shift completely. Upstream filtration should be no coarser than 200 µm to keep particles from scoring the seat surfaces. The piston diameter of 11.9 mm determines the required magnetic force and influences response time. Connection to the circuit is through 1/4-inch ports that use NPT threads, allowing quick integration with standard pipe fittings.
Flow Direction
Straight
Max Fluid Viscosity
45 mm²/s
Max Medium Temp
90 °C
Max Pressure
100 barg
Max Strainer Width
200 μm
Min Medium Temp
2 °C
Min Operating Pressure
0.3 barg
Min Pilot Flow
1 l/min
Nominal Flow
15 l/min
Piston Diameter
11.9 mm
Port Size
1/4 in
Port Thread
NPT
Pressure Direction
Pin > Pout
Valve Config
2/2-Way
Valve Function
Normally Open
Weight Excl. Coil
0.6 kg
Worldwide Shipping with FedEx and UPS.
We accept all major credit cards
1 year Hydraulic Parts USA warranty on ALL products
We are a Better Business Bureau A+ business