Danfoss | 180L0167
180L0167
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 180L0167 solenoid valve belongs to the VDHT Solenoid Valves series produced by Danfoss. It controls hydraulic fluid in automation loops by opening only when energized. The unit is configured as normally closed, so flow is blocked until the coil is powered. Both inlet and outlet ports are 3/4 inch, and threads follow the BSP standard to match common manifold blocks. The valve is intended for manifold flow direction, allowing direct mounting into integrated hydraulic plates. A 35 mm piston diameter gives the actuator the area needed to resist line pressure while maintaining fast response. Designed for moderate capacity circuits, the valve permits a maximum flow of 120 l/min without exceeding pressure drop targets.
For system safety the assembly withstands up to 140 bar g operating pressure, letting it work in high-pressure transmission lines. Media temperatures can reach 90 °C, so the valve suits warm oil or glycol service typical of industrial machines. The shipping weight is 7.498 kg, while the installed net weight is 6.6 kg, helping planners account for lifting and support hardware. A packaged volume of 7.938 L helps determine enclosure space during manifold design. These characteristics combine to support dependable hydraulic automation where compact form, thermal tolerance, and pressure capability are required.
Technical Specifications
Connection Standard
BSP
Flow Direction
Manifold
Gross Weight
7.498 kg
Inlet Size
3/4 in
Max Flow
120 l/min
Max Media Temperature
90 °C
Max Operating Pressure
140 barg
Net Weight
6.6 kg
Outlet Size
3/4 in
Piston Diameter
35 mm
Valve Function
NC
Volume
7.938 L
1620 Old Apex Road
Shipping & Payment Options
