180L0123

The 180L0123 solenoid valve belongs to the VDHT Solenoid Valves series and is manufactured by Danfoss for precise on-off control in hydraulic automation loops. As a 2/2 configuration, it offers two ports and two switching positions, allowing straightforward isolation or release of fluid in a single line. A 3/4 in inlet accommodates common supply hoses, while a 1/2 in outlet provides a reduced discharge connection to downstream components. Both ports follow the BSP thread standard to maintain consistent sealing with widely available fittings. The valve supports a maximum flow rate of 60 l/min, so actuators can cycle without starvation when medium-size circuits demand moderate throughput. These specifications define the dimensional and functional footprint required when selecting hardware for compact power units or mobile equipment manifolds.

Hydraulic systems using the 180L0123 can operate up to 160 barg because the body and internal seals are rated for this pressure, ensuring safe closure even under peak load. An internal piston measuring 18 mm in diameter generates the area needed to react quickly to the magnetic force produced by the coil, which shortens response time during repetitive machine cycles. The designated mounting direction is manifold, so the valve slips directly into a cavity block and eliminates separate pipe runs, shortening installation paths and reducing leak joints. Together, the high pressure rating, balanced piston size, and manifold integration enable reliable, space-saving flow control where electronic actuation must match mechanical strength in industrial or mobile hydraulic assemblies.