Danfoss | 148B5208
148B5208
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 148B5208 check and stop valve is part of the SCA Check and Stop Valves series from Danfoss and is used to isolate or allow flow in hydraulic automation lines. This standard version valve is equipped with steel connections machined to the EN 10220 pipe standard. An angleway body orientation helps designers turn a pipeline through ninety degrees without extra fittings. A 15 mm butt-weld inlet lets technicians join the valve directly to matching tube, while the flow coefficient of 8 m³/h defines the expected pressure drop at given conditions. The assembly withstands working pressures up to 52 bar, and it requires a minimum differential pressure of 0.04 bar to seat reliably.
A corresponding 15 mm butt-weld outlet mirrors the inlet for balanced installation. The internal volume of 4.756 L affects evacuation and refrigerant charge calculations during commissioning. Operating temperatures can range from −60 °C to 150 °C, enabling use with very cold or moderately hot process media. The valve ships at a gross weight of 2.084 kg, while the net weight of 1.75 kg represents the mass installed on the line. These weight and thermal characteristics support equipment layouts that demand low inertia and broad service temperature capability.
Technical Specifications
Connection Material
Steel
Connection Standard
EN 10220
Direction
Angleway
Flow Coefficient (kv)
8 m³/h
Gross Weight
2.084 kg
Inlet Size
15 mm
Inlet Type
Butt weld
Max Working Pressure
52 bar
Minodp
0.04 bar
Net Weight
1.75 kg
Outlet Size
15 mm
Outlet Type
Butt weld
Temp Max
150 °C
Temp Min
-60 °C
Valve Version
Standard version
Volume
4.756 L
1620 Old Apex Road
Shipping & Payment Options
