Danfoss | 180B1012
180B1012
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 180B1012 pump is part of the PAHT G High Pressure Pumps series and is manufactured by Danfoss for hydraulic automation duties where steady flow and elevated pressure are required. A geometric displacement of 50 cm³ per revolution sets the basic volumetric output for each shaft rotation. With a flow of 68.7 l/min at 1500 rpm, the unit matches common industrial drive speeds for predictable circuit sizing. Maximum outlet pressure reaches 80 barg so the pump can charge high pressure manifolds without external boosters, while the minimum outlet pressure of 30 barg maintains stable operation in low demand periods. Shaft speed is permitted up to 1800 rpm to accommodate fast-running electric motors, and it can slow to 700 rpm when reduced flow is needed. A continuous minimum speed of 1000 rpm is specified to avoid excessive pulsation during extended duty cycles. When working at maximum pressure, the required torque is 68.5 Nm, a value used to select a compatible mechanical coupling.
Corrosion resistance is supported by an AISI 316 body, making the pump suitable for aggressive fluids in automated hydraulic skids. An NBR seal set contains the process medium and limits leakage under dynamic pressure. A 1 1/2 in inlet connection allows unrestricted suction flow, while the 1 in outlet connection provides a compact path for the pressurized discharge. Peak inlet pressure of 20 barg lets the pump accept pre-charged feed lines without damage, and a motor rated at 11 kW at 1500 rpm supplies the power demanded at typical working conditions. The sound pressure level is 81 dB(A), which guides enclosure design and hearing protection requirements. Finally, a weight of 34 kg aids in planning for mounting hardware and manual handling during installation or service.
Technical Specifications
Body Material
AISI 316
Continuous Min Speed
1000 rpm
Flow At 1500 Rpm
68.7 l/min
Geometric Displacement
50 cm³/rev
Inlet Connection Size
1 1/2 in
Max Outlet Pressure
80 barg
Max Speed
1800 rpm
Min Outlet Pressure
30 barg
Min Speed
700 rpm
Motor Size At 1500 Rpm
11 kW
Outlet Connection Size
1 in
Peak Inlet Pressure
20 barg
Seal Material
NBR
Sound Pressure Level
81 dB(A)
Torque At Max Pressure
68.5 Nm
Weight
34 kg
1620 Old Apex Road
Shipping & Payment Options
