Danfoss | 11009113
11009113
Request a Quote
Call for Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 11009113 pump belongs to the H1P Axial Piston Single Pumps series produced by Danfoss for closed-circuit hydraulic automation. It delivers variable flow through an electrical displacement control that accepts a 24 VDC signal, allowing integration with electronic machine management. Right-hand clockwise rotation matches common engine PTO layouts, while a maximum displacement of 147 cc per revolution provides the flow range needed for medium-to-high power functions. The input shaft uses a 13-tooth 8/16 spline to transmit torque reliably, and the SAE D four-bolt mounting flange aligns with standardized housings for quick installation. System pressure capability reaches 420 bar, so the pump can support high load demands without external boosting. A built-in charge pump moves 26 cc per revolution to maintain case back-pressure and improve inlet conditions during rapid swash changes.
Further hardware features complete the hydraulic package. A charge relief valve set to 24 bar prevents excess case pressure and protects seals. The rear auxiliary pad offers a 14-tooth C-pad interface, enabling a downstream pump or accessory to be driven in tandem. Twin-port Code 62 endcaps simplify loop routing, and ports sealed with ANSI O-ring boss threads minimize external leakage paths. Electrical feedback or override wiring connects through a Deutsch DT04-2P plug, which resists moisture and vibration in mobile platforms. Remote full-flow filtration keeps the working fluid clean without adding differential pressure across the pump housing. Metering accuracy is supported by a 1.3 mm orifice labeled A + b that governs internal flushing flow. A manual override is present so technicians can shift the swashplate mechanically during setup or emergency service.
Technical Specifications
Auxiliary Pad
14 Tooth, C Pad
Charge Pump Displ
26 cc/rev
Charge Relief Pressure
24 bar
Connector Type
Deutsch DT04-2P
Control Type
Electrical Displacement
Control Voltage
24 VDC
Endcap Type
Twin Port, Code 62
Filtration
Remote Full Flow
High Pressure Setting
420 bar
Input Shaft
13 Tooth, 8/16
Manual Override
Yes
Max Displacement
147 cc/rev
Mounting Flange
SAE D 4-Bolt
Orifice A+b
1.3 mm
Port Configuration
ANSI O-Ring Boss
Rotation
Right-Hand Clockwise
1620 Old Apex Road
Shipping & Payment Options
