Danfoss | 11005673
11005673
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 11005673 pump belongs to the H1P Axial Piston Single Pumps series and is produced by Danfoss for variable-displacement hydraulic automation. It delivers a maximum displacement of 147 cc per revolution so the circuit can generate high flow on demand, while a working pressure limit of 300 bar protects the rotating group during heavy duty cycles. A dedicated charge pump supplies 26 cc per revolution to keep the case filled and improve control response, and a charge relief set at 24 bar prevents excess pressure on the low-pressure side. Swashplate position is adjusted through electrical displacement control; this interface operates at 12 V and connects by a sealed Deutsch DT04-2P plug for reliable field wiring. Oil entering the unit passes through an integral full-flow filter equipped with a bypass sensor, allowing maintenance personnel to detect element restriction before flow is impeded.
An A+b pilot orifice sized at 1.3 mm meters control oil so displacement changes occur smoothly. A 13-tooth B auxiliary pad is provided to drive external accessories, and the main input shaft features a 13-tooth 8/16 spline for direct coupling to prime movers. Mechanical attachment to the machine frame uses an SAE D 4-bolt mounting flange, while the twin-port endcap is secured by a Code 62 metric 4-bolt flange to streamline hose layout. System plumbing mates with ANSI O-Ring Boss ports, and counterclockwise rotation matches common engine power-takeoff directions.
Technical Specifications
A+b Orifice
1.3 mm
Auxiliary Pad
13 Tooth, B Pad
Charge Pump Displacement
26 cc/rev
Charge Relief Pressure
24 bar
Control Connector
Deutsch DT04-2P
Control Type
Electrical Displacement Control
Control Voltage
12 V
Endcap Flange
Code 62 Metric 4-Bolt
Endcap Type
Twin Port
Filtration
Integral Full Flow With Filter Bypass Sensor
High Pressure Setting
300 bar
Input Shaft
13 Tooth, 8/16
Max Displacement
147 cc/rev
Mounting Flange
SAE D 4-Bolt
Port Configuration
ANSI O-Ring Boss
Rotation
Counterclockwise
1620 Old Apex Road
Shipping & Payment Options
