11000672

The 11000672 axial piston pump belongs to the H1P Axial Piston Single Pumps series manufactured by Danfoss for closed-loop hydraulic automation. A charge pump displacement of 26 cm³ per revolution supplies make-up oil to the loop so that the main circuit stays filled under all duty cycles. Clockwise rotation allows direct coupling to prime movers that turn in the standard direction on mobile machines. A 27-tooth 16/32 splined input shaft transfers engine torque to the rotating group with accurate alignment and minimal backlash. The SAE D four-bolt mounting flange positions the housing on common transmission faces, making replacement straightforward during field service.

The charge relief valve is set to open at 24 bar, redirecting excess make-up flow and protecting the low-pressure side from overload. System safety on the high-pressure side is maintained by an overpressure setting of 420 bar, preventing component damage during transient spikes. Electronic Displacement Control rated for 12 V and terminated with a Deutsch DT04-2P connector lets vehicle controllers modulate pump output in real time. Remote full charge flow filtration routes all make-up oil through an external filter assembly, reducing particulate ingress and sustaining long component life.