Bosch Rexroth | ZDR10DP1-5X150YMV
ZDR10DP1-5X/150YMV
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The ZDR10DP1-5X/150YMV valve belongs to the ZDR Pressure Reducing Valves series and is manufactured by Bosch Rexroth for hydraulic automation where stable downstream pressure is required. It is built in nominal size 10 (NG10), giving it a medium flow path suitable for general industrial circuits. The unit follows the D05 Cetop size so it drops directly onto standardized subplates, while the ISO 4401-05-04-0-05 mounting interface aligns the porting underneath the body. Five ports support separate connections for supply, reduced pressure, pilot, drain, and measurement services within the same block. A rotary knob provides manual adjustment so technicians can fine-tune the setting during commissioning. The valve can cap the secondary pressure at 150 bar to protect cylinders and motors downstream, yet it withstands 315 bar at the inlet to survive high-pressure mains. A maximum flow of 80 l/min keeps response fast without excessive pressure loss under full load.
The design omits a check valve, so reverse flow returns through the main gallery without additional components. Leakage oil is routed to port TA, preventing pressure build-up in the pilot housing. Pilot oil is taken from the internal supply and returned externally, isolating the control chamber from back pressure in the return line. A G1/4 pressure gauge port is provided so operators can verify the regulated pressure during operation. Pressure reduction occurs in port P, and the spool symbol P2 → P1 illustrates the flow path from the high-pressure side to the controlled outlet. FKM seals resist mineral oils and elevated temperatures to extend service life. The assembled body weighs 2.54 kg, making it light enough for single-person installation on a manifold.
Technical Specifications
Adjustment Type
Rotary Knob
Cetop Size
D05
Check Valve
None
Inlet Pressure Max
315 bar
Leakage Drain Port
TA
Max Flow
80 l/min
Mounting Interface
ISO 4401-05-04-0-05
Nominal Size
10 (NG10)
Number Of Ports
5
Pilot Oil
Internal Supply, External Drain
Pressure Gauge Port
G1/4
Reduction Port
P
Seal Material
FKM
Secondary Pressure Max
150 bar
Spool Symbol
P2 → P1
Weight
2.54 kg
1620 Old Apex Road
Shipping & Payment Options
