Bosch Rexroth | Z4WE6X254-3XEG24N9K4V60
Z4WE6X254-3X/EG24N9K4/V/60
Request a Quote
In-Stock, Ships 1-2 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The Z4WE6X254-3X/EG24N9K4/V/60 valve is produced by Bosch Rexroth for the Z4WE Solenoid Actuation Spool Valves series and serves to shift hydraulic flow paths in automated machinery. A single solenoid on side A provides the actuation force, allowing electrical control from one direction only. The coil is designed for 24 V DC, so it interfaces directly with common machine control supplies, and it draws a rated current of 1.25 A to keep wiring sizes modest. Power consumption is limited to 30 W, enabling dense manifold layouts without excessive heat rise. A 100 percent duty cycle permits continuous energization when a circuit must remain locked in position. The coil surface may reach 120 °C, defining the thermal margin that must not be exceeded. Electrical connection is made through a DIN EN 175301-803 three-pole plug with protective earth, which supports fast replacement. Mounting follows the ISO 4401-03-02-0-05 interface so the unit bolts to standard NG6 subplates.
The fluid must meet ISO 4406 class 20/18/15 cleanliness to protect the spool and reduce wear. A concealed manual override lets technicians shift the valve without energizing the solenoid while preventing accidental use during operation. Ports P, A, and B can withstand 315 bar, giving the valve the strength for high-pressure circuits, whereas port T is limited to 210 bar to safeguard the tank line. Flow capacity reaches 50 l/min, matching medium-size actuators without creating excessive pressure drop. FKM seals resist mineral oils and elevated temperatures, extending service life in demanding environments. The enclosure carries an IP65 rating so dust and water jets cannot enter during wash-down procedures. Total mass is 1.2 kg, allowing one-handed installation on manifold stacks.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Coil Surface Temperature Max
120 °C
Connector Type
DIN EN 175301-803 (3-pole 2+PE)
Duty Cycle
100%
Manual Override
Concealed
Maximum Flow
50 l/min
Maximum Operating Pressure (p, A, B)
315 bar
Mounting Interface
ISO 4401-03-02-0-05
Nominal Voltage
24 V DC
Port T Maximum Pressure (dc)
210 bar
Power Consumption
30 W
Protection Class
IP65
Rated Current
1.25 A
Seal Material
FKM
Solenoid Configuration
Single (side a)
Weight
1.2 kg
1620 Old Apex Road
Shipping & Payment Options
