Bosch Rexroth | Z4WE6D27-3XEG24N9K4
Z4WE6D27-3X/EG24N9K4
Request a Quote
In-Stock, Ships 1-2 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The Z4WE6D27-3X/EG24N9K4 valve is manufactured by Bosch Rexroth and belongs to the Z4WE Solenoid Actuation Spool Valves series. It directs hydraulic flow in automated circuits where rapid on-off control is required. The nominal solenoid supply is 24 V DC, drawing a rated current of 1.25 A to shift the spool. Continuous duty at 100 % ED allows the coil to stay energized without thermal derating. Electrical connection is through a DIN EN 175301-803 three-pin plug with a protective earth to simplify field wiring. Power consumption is 30 W, which defines the load on the control cabinet supply. The valve housing meets IP65 ingress protection so installed units withstand dust and water jets in industrial environments. The mounting face follows the ISO 4401-03-02-0-05 porting pattern to ensure interchangeability with standard subplates.
Maximum operating pressure on ports P, A, and B is 315 bar, enabling the spool to control high-pressure circuits, while port T tolerates 210 bar when driven by direct-current coils. The unit supports up to 50 l/min of flow so designers can size actuators accordingly. Internally, cleanliness class 20/18/15 under ISO 4406 must be maintained to protect sealing edges. A concealed manual override designated N9 permits emergency actuation, and it can be used while tank pressure remains below 50 bar. Switching frequency can reach 15 000 cycles per hour, allowing rapid sequence commands in high-speed machinery. Fasteners should be tightened to 7 Nm on the M5 screws to secure the valve without distorting the seal plate. These parameters together define reliable service for hydraulic automation tasks that depend on precise solenoid spool positioning.
Technical Specifications
Cleanliness Class (iso 4406)
20/18/15
Duty Cycle
100% ED
Electrical Connection
DIN EN 175301-803, 3-pin (2+PE)
Ingress Protection
IP65
Manual Override
Concealed (N9)
Manual Override Max Tank Pressure
50 bar
Max Flow
50 l/min
Max Operating Pressure (p, A, B)
315 bar
Max Pressure (port T)
210 bar (DC)
Max Switching Frequency
15000 1/h
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Power Consumption
30 W
Rated Current
1.25 A
Tightening Torque (m5 Screws)
7 Nm
1620 Old Apex Road
Shipping & Payment Options
