1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com

Bosch Rexroth | 4WEH16GA7X6EG12NDA

4WEH16GA7X/6EG12NDA

Request a Quote

  Call For Quote
Repair Options Available
Worldwide Delivery
1-Year Warranty

What Happens Next?

1
Email Confirmation

You will get an email confirming we have received your inquiry.

2
Dedicated Account Manager

A team member will review your request and be in touch concerning any questions or specifications.

3
Quote Delivered

You will receive a comprehensive quote tailored to your specific needs.

The 4WEH16GA7X/6EG12NDA valve belongs to the WEH Directional Spool Valves series manufactured by Bosch Rexroth for electro-hydraulic automation tasks. It uses electro-hydraulic actuation to shift the spool with pilot flow, allowing remote electrical control over high-pressure circuits. The valve is supplied in nominal size NG16 so it can match subplates and manifolds designed for 16 mm flow paths. A maximum flow of 300 l/min permits use in medium to high volume supply lines without excessive pressure drop. The main ports p, a, and b withstand up to 280 bar, enabling operation in standard industrial power units. A pilot stage designated 4WE6E high-power type provides reliable spool movement under demanding duty cycles. The assembly mounts on an ISO 4401-07-07-0-05 interface, which standardizes port geometry for interchangeability. Installation uses four M10 × 60 screws, and a tightening torque of 58 Nm secures the body against leakage. A manual override, code N, lets technicians shift the spool during setup or power loss.

Electrical features support safe pilot control. The coil is rated for 12 V DC so low-voltage supplies can activate the pilot solenoids in mobile or battery-based systems. A DIN EN 175301-803 (K4) connector provides a sealed plug-in interface that simplifies wiring and maintenance. The valve is designed for mineral oil hydraulic fluids according to DIN 51524, ensuring compatibility with widely available pressure media. Fluid cleanliness must be maintained at ISO 4406 class 20/18/15 to protect the precision-ground spool lands from wear. Pilot pressure can reach 250 bar, giving sufficient force to shift the main stage even under full load, while port T tolerates up to 250 bar so return lines can be back-pressured if required. For spring-centered operation the pilot supply must be at least 14 bar to guarantee proper centering after actuation. These parameters allow the valve to integrate into high-performance hydraulic systems while protecting internal components and maintaining predictable switching behavior.

Technical Specifications

Actuation
Electro-Hydraulic

Coil Rated Voltage
12 V DC

Electrical Connector
DIN EN 175301-803 (K4)

Fluid Cleanliness Class
20/18/15 (ISO 4406)

Hydraulic Fluid
Mineral Oil (DIN 51524)

Manual Override
Yes (Code N)

Max Flow
300 l/min

Max Operating Pressure (p,a,b)
280 bar

Max Pilot Pressure
250 bar

Max Pressure Port T
250 bar

Min Pilot Pressure (spring-centered)
14 bar

Mounting Interface
ISO 4401-07-07-0-05

Mounting Screw Size
M10 × 60 (ISO 4762)

Mounting Screw Torque
58 Nm

Nominal Size
NG16

Pilot Valve Type
4WE6E (High-Power)

address-icon
1620 Old Apex Road
Cary, NC 27513, USA
phone-icon
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Shipping & Payment Options
DHL-logo FexEd-logo UPS-logo freight-icon

AmEx-icon Mastercard-icon Visa-icon wire-transfer-icon
To Speak to a sales representative for pricing & lead time
International

1-919-443-0207

Worldwide Shipping with FedEx and UPS.

We accept all major credit cards

1 year Hydraulic Parts USA warranty on ALL products

We are a Better Business Bureau A+ business