Bosch Rexroth | 4WEH16E7X6EG24NETK4B10V
4WEH16E7X/6EG24NETK4/B10V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WEH16E7X/6EG24NETK4/B10V is manufactured by Bosch Rexroth as part of the WEH Directional Spool Valves series. It redirects pressurized fluid in automated hydraulic machinery and relies on electro-hydraulic actuation so a low pilot flow can shift the main NG16 spool under load. The 4-way flow configuration provides four service ports, enabling bidirectional cylinder or motor control. A 6E pilot valve is mounted on the cover to achieve fast switching of the main stage. The integrated coil is rated for 24 V DC, letting machine controllers energize the pilot directly from standard power supplies, while a DIN EN 175301-803 K4 plug offers a common electrical interface for quick wiring. A manual override is present so technicians can position the spool during commissioning or fault recovery. The body bolts to a subplate through an ISO 4401-07-07-0-05 interface, which standardizes port geometry for interchangeability with other size-matched components.
For reliability in high-pressure circuits, the valve tolerates operating pressures up to 280 bar at the work ports. The pilot stage may be supplied with pressures up to 250 bar, while a minimum of 14 bar is required to achieve consistent switching of the main spool. Internal pilot supply and return, designated ET, remove the need for external X or Y lines, and the subplate pilot ports remain closed to keep the circuit isolated from tank. A 1.0 mm throttle orifice coded B10 dampens pressure surges and smooths spool movement. FKM sealing material, identified by the V suffix, withstands high temperature and aggressive hydraulic fluids to reduce leakage. Four M10 × 60 mounting screws secure the housing to the subplate and maintain alignment under dynamic loads, completing the mechanical attachment requirements for automated hydraulic systems.
Technical Specifications
Actuation
Electro-Hydraulic
Coil Voltage
24 V DC
Electrical Connection
DIN EN 175301-803 (K4)
Flow Configuration
4-Way
Manual Override
Present
Max Operating Pressure
280 bar
Max Pilot Pressure
250 bar
Min Pilot Pressure
14 bar
Mounting Interface
ISO 4401-07-07-0-05
Mounting Screws
4x M10 × 60
Pilot Supply/return
Internal/Internal (ET)
Pilot Valve Type
6E
Seal Material
FKM (V)
Size
NG16
Subplate Ports X/y
Closed (ET)
Throttle Orifice
1.0 mm (B10)
1620 Old Apex Road
Shipping & Payment Options
