Bosch Rexroth | Z4WE6E68-J1EW110K4QMAG24
Z4WE6E68-J1/EW110K4QMAG24
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The Z4WE6E68-J1/EW110K4QMAG24 valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and is intended to switch flow paths in hydraulic automation circuits. It is built in size 6, NG6 format, allowing direct mounting on subplates that follow ISO 4401-03-02-0-05 or the NFPA D03 pattern. The flow channels tolerate up to 350 bar on ports A, B, and P, while port T can return oil to tank at pressures up to 160 bar. A rated throughput of 60 l/min supports compact power units and medium-size actuators without generating excessive pressure loss. The internal components operate correctly in any installation position, provided the fluid cleanliness remains at or better than ISO 4406 code 20/18/15. Actuation is provided by a high-power wet-pin coil that can be detached for service and is energized with 110 V at either 50 or 60 Hz. The coil draws 0.52 A on a 50-Hz line and 0.39 A on a 60-Hz line, ensuring predictable load on control transformers while delivering consistent magnetic force.
System feedback and environmental protection are handled by additional features integrated into the same housing. Electrical power reaches the solenoid through a Form A connector compliant with DIN EN 175301-803, and the IP65 enclosure rating prevents dust ingress and water jets from affecting the windings. A QM-type spool position monitor issues a signal through a 24 V DC circuit so the controller can verify that the commanded switching state has been achieved. The combined mass of both solenoids is 1.95 kg, which aids installation on manifold blocks without special supports. Together, these attributes allow the valve to couple reliable actuation, position feedback, and robust sealing within a compact package suitable for machinery that requires fast, repeatable directional control.
Technical Specifications
Cleanliness Class (iso 4406)
20/18/15
Electrical Connector
DIN EN 175301-803 (Form A)
Installation Position
Any
Maximum Flow (ac)
60 l/min
Maximum Operating Pressure (a/b/p)
350 bar
Maximum Tank Port Pressure (ac)
160 bar
Monitor Supply Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05; NFPA D03
Protection Class (ip)
IP65
Rated Current (110 V, 50 Hz)
0.52 A
Rated Current (110 V, 60 Hz)
0.39 A
Size
6 (NG6)
Solenoid Type
High-Power Wet-Pin, Detachable Coil
Solenoid Voltage
110 V (50/60 Hz)
Spool Position Monitor
QM Type (a)
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
