Bosch Rexroth | 4WE6Y6XEW110N9DK25LB10V62-AN
4WE6Y6X/EW110N9DK25L/B10V/62 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6Y6X/EW110N9DK25L/B10V/62 AN valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and directs hydraulic fluid to actuators in automated machinery. Its valve size 6 (NG6) suits compact manifolds where space is limited yet precise control is needed. A maximum operating pressure of 350 bar permits use in high-pressure circuits, while the 60 l/min maximum flow rate defines the throughput the spool can pass without excessive pressure drop. The ISO 4401-03-02-0-05 mounting pattern allows direct stacking on standardized sub-plates, and the ANSI B93.9 porting standard keeps port identification consistent with North American layouts. A throttle insert of 1.0 mm in port P moderates inlet flow to reduce shock when shifting. FKM sealing material withstands aggressive hydraulic oils and elevated temperatures, and the concealed manual override (N9) lets maintenance personnel shift the spool mechanically during commissioning or power loss.
The wet-pin solenoid operates on 110 V AC at 50 or 60 Hz, drawing 0.52 A on 50 Hz supplies and 0.39 A on 60 Hz, so panel designers can size fuses and wiring accurately. A DK25L five-pole electrical connector provides rapid coil exchange and secure grounding for field wiring. Insulation class H windings, together with a permitted coil surface temperature of 120 °C, enable continuous duty without thermal degradation. The IP65 protection class keeps dust and low-pressure water jets out of the coil housing, supporting outdoor or wash-down installation when a suitable mating plug is fitted. A locating hole with a locking pin (/62) fixes the body on the sub-plate to maintain correct orientation under vibration. These electrical and mounting features integrate the valve reliably into automated hydraulic systems that demand repeatable, electrically commanded spool positioning.
Technical Specifications
Coil Max Surface Temp
120 °C
Electrical Connector
DK25L (5-pole)
Insulation Class (ac)
H
Locating Hole
With Locking Pin (/62)
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure
350 bar
Mounting Pattern
ISO 4401-03-02-0-05
Operating Voltage
110 V AC (50/60 Hz)
Porting Standard
ANSI B93.9
Protection Class
IP65
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Seal Material
FKM (V)
Throttle Insert
Port P Dia. 1.0 mm (B10)
Valve Size
6 (NG6)
1620 Old Apex Road
Shipping & Payment Options
