Bosch Rexroth | 4WE6Y6XEW110N9DK25L62
4WE6Y6X/EW110N9DK25L/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6Y6X/EW110N9DK25L/62 valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and directs hydraulic flow to automate actuators. It uses nominal size 6 cavities to fit compact power units, and the ISO 4401-03-02-0-05 (NFPA D03) mounting interface lets it bolt directly to standard subplates. A maximum flow of 60 l/min permits medium-duty circuit throughput, while 350 bar on ports P, A, and B accommodates high-pressure supply lines; the return port is limited to 160 bar to protect the tank line. The coil is designed for 110 V AC at 50 / 60 Hz, drawing only 0.39 A so panel transformers remain small, and the DK25L five-pole connector provides a quick electrical hookup. These features combine to create a valve that switches oil paths quickly and withstands demanding operating pressures.
The concealed manual override coded N9 lets technicians shift the spool during commissioning without energizing the solenoid, and an IP65 enclosure prevents dust and water jets from reaching internal windings. NBR sealing supports fluid temperatures from –20 °C to +80 °C, so cold starts and hot reservoirs remain within specification, and a viscosity window of 2.8 to 500 mm²/s keeps response consistent across thin or heavy oils. The cleanliness class of ISO 4406 20/18/15 defines the filtration level needed to avoid silting in the lands. When the coil is de-energized, switch-off overvoltage is limited to 500 V to protect driver electronics. A locating hole sized to ISO 8752-3×8-St (/62) centers the body on the manifold, and the two-solenoid assembly weighs 1.95 kg so one person can install or remove it without lifting equipment.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Electrical Connector
DK25L (5-pole)
Hydraulic Fluid Temp
-20 to +80 °C (NBR)
Ip Rating
IP65
Locating Hole/pin
ISO 8752-3x8-St (/62)
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Pressure (p, A, B)
350 bar
Max Pressure (t, Ac)
160 bar
Mounting Interface
ISO 4401-03-02-0-05 (NFPA D03)
Nominal Size
6
Nominal Voltage
110 V AC (50/60 Hz)
Rated Current (60 Hz)
0.39 A
Switch-off Overvoltage
500 V
Viscosity Range
2.8 to 500 mm²/s
Weight
1.95 kg (two solenoids)
1620 Old Apex Road
Shipping & Payment Options
