4WE6Y6X/EG24N9DK6LQMAG24/62

The 4WE6Y6X/EG24N9DK6LQMAG24/62 directional valve belongs to the WE Directional Spool Valves series manufactured by Bosch Rexroth for hydraulic automation tasks that require reliable flow direction control. It is built around the size 6 envelope and employs a Y spool to shift fluid between pressure and work ports according to command signals. The subplate interface follows the ISO 4401-03-02-0-05 pattern so the unit mates with standard CETOP 3 manifolds. A 24 V DC solenoid energizes the valve; the coil consumes 30 W and draws 1.25 A at that voltage, allowing direct connection to common machine control supplies. Continuous operation is permitted because the electromagnetic assembly is rated for a 100 % duty cycle. Electrical hookup is completed through a 7-pin DIN EN 175201-804 connector marked DK6L, which provides separate pins for power and monitoring. For commissioning or emergency intervention there is a concealed manual override identified by code N9, enabling the spool to be shifted without electrical power.

The hydraulic circuit parameters align with medium-pressure mobile or industrial systems: the pressure, A, and B ports withstand up to 350 bar, while the P supply line shares the same limit, and the tank return port is allowed up to 210 bar. A nominal flow capacity of 80 l/min ensures adequate volume transfer for actuators within the valve’s frame size. The solenoid housing and connector assembly carry an IP65 rating, so dust ingress and low-pressure water jets will not affect performance when the mating plug is installed. An inductive position switch mounted on the “a” end of the spool supplies 24 V DC feedback to a controller, giving positive confirmation of valve state. NBR sealing elements resist common mineral hydraulic oils and maintain leakage control over the entire temperature range. Accurate mounting is aided by a locating hole prepared to ISO 8752-3×8-St, and this feature is designated by suffix /62 in the part code.