Bosch Rexroth | 4WE6Y6XEG24N9DK24LQMAG2462
4WE6Y6X/EG24N9DK24LQMAG24/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6Y6X/EG24N9DK24LQMAG24/62 valve is produced by Bosch Rexroth as part of the WE Directional Spool Valves series. It directs pressurized fluid to actuators in hydraulic automation circuits. The valve handles a maximum operating pressure of 350 bar at ports P, A, and B so it can manage high-pressure power units. An allowable flow of 80 l/min in direct-current service supports medium-sized cylinders without causing excessive pressure loss. Continuous energization is permitted because the solenoid is rated for a 100 percent duty cycle, enabling uninterrupted motion control. Electrical supply requirements are fixed at 24 V DC, with a rated current draw of 1.25 A and nominal power consumption of 30 W, providing predictable load for power supplies. The coil tolerates voltage variations of ±10 percent, which protects performance during line fluctuations. Fluid entering the valve must meet ISO 4406 cleanliness class 20/18/15 to prevent spool wear.
For mounting, the 4WE6Y6X/EG24N9DK24LQMAG24/62 follows the ISO 4401-03-02-0-05 pattern, which matches NFPA D03 (T3.5.1 R2-2002) and allows interchange with common subplates. Electrical connection is made through a 4-pole M12×1 plug, simplifying wiring in modular manifolds. When the solenoid is de-energized, switch-off overvoltage is limited to 500 V, protecting upstream control electronics. The DK24 coil carries an IP65 protection class, so the enclosure resists dust ingress and low-pressure water jets in factory wash-down zones. Coil surface temperature is allowed up to 120 °C, enabling operation near hot power units without thermal damage. Tank port pressure can reach 210 bar in direct-current modes, supporting back-pressure applications such as counterbalance circuits. Total mass with two solenoids is 1.95 kg, keeping manifold loads low for compact machinery.
Technical Specifications
Cleanliness Class
ISO 4406 (c) 20/18/15
Connector Type
M12x1 4-pole
Duty Cycle
100% ED
Max Coil Surface Temp
120 °C
Max Flow (dc)
80 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Switch-off Overvoltage
500 V
Max Tank Port Pressure (dc)
210 bar
Mounting Pattern
ISO 4401-03-02-0-05
Nfpa Pattern
T3.5.1 R2-2002 D03
Nominal Power (dc)
30 W
Nominal Voltage (dc)
24 V
Protection Class (dk24)
IP65
Rated Current (24 V Dc)
1.25 A
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
