Bosch Rexroth | 4WE6Y6XEG24K4QMAG24
4WE6Y6X/EG24K4QMAG24
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6Y6X/EG24K4QMAG24 directional spool valve is produced by Bosch Rexroth for the WE Directional Spool Valves series and is intended to direct hydraulic flow in automated circuits. It is built in valve size 6 so the internal galleries and port faces match size-6 manifolds. A maximum flow of 80 l/min allows the unit to supply medium-capacity cylinders without excessive pressure drop, while a maximum operating pressure of 350 bar on ports P, A, and B supports high force actuators. The tank port withstands up to 210 bar, ensuring safe return flow even under back-pressure conditions. Actuation is provided by a wet-pin, detachable coil solenoid; the immersed armature simplifies heat removal and the detachable design speeds coil replacement. The coil is energized at a nominal voltage of 24 V DC, draws a rated current of 1.25 A, and consumes 30 W, giving predictable electrical loading for power supplies.
Continuous operation is possible because the coil is specified for a 100 % duty cycle, so it can stay energized without thermal pauses. Electrical connection is made through a DIN EN 175301-803 K4 plug, and the same connector seals to IP65, protecting internal parts from dust and low-pressure jets during wash-down. The mounting face follows porting pattern ISO 4401-03-02-0-05, allowing direct installation on standard sub-plates. Switching speed is capped at 4.2 cycles per second, which defines the maximum command frequency in dynamic servo loops. For feedback, a 24 V DC position switch is supported, and spool position monitoring of type QM in position 'a' provides a discrete signal that the valve has shifted fully. The assembly weighs 1.45 kg with one solenoid fitted, a value that aids in determining manifold support requirements.
Technical Specifications
Duty Cycle
100%
Electrical Connection
DIN EN 175301-803 (K4)
Enclosure Protection
IP65 (K4 connector)
Max Operating Pressure (p/a/b)
350 bar
Max Port T Pressure (dc)
210 bar
Max Switching Frequency (dc)
4.2 1/s
Maximum Flow (dc)
80 l/min
Nominal Power
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Position Switch Voltage
24 V DC
Rated Current
1.25 A
Solenoid Type
Wet-Pin, Detachable Coil
Spool Position Monitoring
Type QM (Position 'a')
Valve Size
6
Weight (one Solenoid)
1.45 kg
1620 Old Apex Road
Shipping & Payment Options
