Bosch Rexroth | 4WE6Y6XBG24NXDZ2V
4WE6Y6X/BG24NXDZ2/V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6Y6X/BG24NXDZ2/V valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and directs pressurized fluid to cylinders or motors in hydraulic automation systems. The solenoids operate at a nominal voltage of 24 V DC that matches typical machine control power rails. At this voltage the coil draws 1.25 A, giving a nominal power requirement of 30 W. A duty cycle of 100 percent ED supports continuous energization without forced cooling. Thermal stability is assisted by insulation class F and a permitted coil surface temperature of 120 °C. Electrical tolerance is broad because the coil accepts a supply variation of ±10 percent. The valve may be installed in any orientation, simplifying manifold design. With both solenoids fitted, the assembly weighs 1.95 kg, allowing straightforward manual handling during service work.
The spool passes up to 80 l/min to actuators while ports P, A, and B withstand operating pressures as high as 350 bar. The tank return can safely carry 210 bar, maintaining integrity in back-pressure conditions. Fast sequencing is possible because the magnetic drive supports a switching frequency of 4.2 cycles per second. Fluid temperature at the ports must stay below 80 °C to prevent seal degradation, and the medium must reach ISO 4406 cleanliness class 20/18/15 to avoid abrasive wear. The design omits a manual override so all shifts are commanded electrically. These limits allow the valve to maintain consistent spool positioning and flow control throughout extended duty cycles.
Technical Specifications
Cleanliness Class (iso 4406)
20/18/15
Coil Surface Temperature Max
120 °C
Duty Cycle
100% ED
Hydraulic Fluid Temperature Max (ports)
80 °C
Installation Position
Any
Insulation Class (dc)
F
Manual Override
N
Maximum Flow (dc)
80 l/min
Maximum Operating Pressure (p, A, B)
350 bar
Maximum Switching Frequency (dc)
4.2 1/s
Maximum Tank Port Pressure (dc)
210 bar
Nominal Power (dc)
30 W
Nominal Voltage
24 V DC
Rated Current (24 V Dc)
1.25 A
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
