Bosch Rexroth | 4WE6Y2-6XEW110N9DALV62
4WE6Y2-6X/EW110N9DAL/V/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6Y2-6X/EW110N9DAL/V/62 directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series. It directs hydraulic flow to actuators in automated systems and is sized for compact manifolds. The valve has a nominal size of 6, allowing installation where small envelope dimensions are important. Its porting pattern follows ISO 4401-03-02-0-05 so it mates with standardized subplates without adapter blocks. The hydraulic passages tolerate a maximum operating pressure of 350 bar at ports P, A, and B, enabling use in high-pressure circuits. A peak flow capability of 60 l/min supports moderate actuator speeds without excessive pressure loss. The solenoid accepts a nominal voltage of 110 V AC; during energizing it draws 220 VA switch-on power and stabilizes at 0.52 A under 50 Hz supply. An enclosure rating of IP65 protects the coil and wiring against dust and low-pressure water jets encountered in industrial environments.
Continuous service is supported by a duty cycle of 100 % ED so the coil may remain energized without thermal rest periods. Once pulled in, holding power drops to 50 VA which limits steady-state heat generation. The winding uses insulation class H to tolerate elevated temperatures produced during long shifts. Electrical connection is provided through a DAL conduit entry with 1/2-14 NPT threads, simplifying hookup with common flexible conduits. Maintenance staff can shift the spool with a concealed N9 manual override when power is unavailable. Sealing elements are made of FKM to resist high-temperature oils and aggressive additives, while the tank port withstands up to 160 bar to accommodate back-pressure conditions. A locating hole dimensioned ISO 8752-3×8-St aligns the valve precisely on the subplate.
Technical Specifications
Degree Of Protection
IP65
Duty Cycle
100% ED
Electrical Connection
DAL (1/2-14 NPT)
Holding Power
50 VA
Insulation Class (ac)
H
Locating Hole
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Tank Port Pressure (ac)
160 bar
Nominal Size
6
Nominal Voltage
110 V AC
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (110 V 50 Hz)
0.52 A
Seal Material
FKM
Switch-on Power
220 VA
1620 Old Apex Road
Shipping & Payment Options
