Bosch Rexroth | 4WE6Y2-6XEG24N9K4V
4WE6Y2-6X/EG24N9K4/V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6Y2-6X/EG24N9K4/V directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series and directs pressurized fluid to actuators in hydraulic automation circuits. The valve fits size 6 cavities, giving it compact flow paths suited for machinery with limited manifold space. Its ISO 4401-03-02-0-05 mounting interface positions the ports accurately on standardized subplates for quick replacement. A maximum operating pressure of 350 bar lets the spool control high-pressure supply lines without deformation, and a maximum flow of 80 l/min supports moderate actuator speeds. Electrically, the coil is energized with 24 V DC, drawing a rated current of 1.25 A, so common control cabinets can drive the solenoid directly. The coil consumes 30 W at nominal voltage, balancing response speed with heat generation, and continuous service is possible because the solenoid is rated for a 100% ED duty cycle.
The valve uses a K4 electrical connector compliant with DIN EN 175301-803, allowing tool-free attachment of molded plugs during wiring. Once connected, the enclosure achieves IP65 ingress protection, preventing dust and water jets from affecting the coil on outdoor equipment. A concealed N9 manual override lets maintenance staff shift the spool when power is lost while keeping the override shielded from accidental actuation; the override can be operated safely as long as tank pressure stays below 50 bar. On the outlet side, the design tolerates 210 bar in the tank port, so back-pressure in return lines will not force fluid past the seals. A switching frequency of 4.2 cycles per second limits wear while still permitting rapid directional changes in servo loops. Surface temperature may reach 120 °C during duty, so nearby components must be rated accordingly, and all dynamic seals are made of FKM to resist common hydraulic oils and maintain flexibility within the stated temperature range.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
K4 (DIN EN 175301-803)
Ingress Protection (k4)
IP65
Manual Override
Concealed (N9)
Manual Override Max Tank Pressure
50 bar
Max Flow (dc)
80 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Switching Frequency
4.2 1/s
Max Tank Port Pressure (dc)
210 bar
Maximum Surface Temperature
120 °C
Mounting Interface
ISO 4401-03-02-0-05
Nominal Power
30 W
Nominal Size
6
Nominal Voltage
24 V DC
Rated Current (24 V Dc)
1.25 A
Seal Material
FKM
1620 Old Apex Road
Shipping & Payment Options
