Bosch Rexroth | 4WE6X7-6XEW110N9K462
4WE6X7-6X/EW110N9K4/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6X7-6X/EW110N9K4/62 valve belongs to the WE Directional Spool Valves series and is produced by Bosch Rexroth. It directs hydraulic oil in automated circuits. The valve has a nominal size of 6, which defines the flow section compatible with compact manifolds. Its porting pattern follows ISO 4401-03-02-0-05 so it can mount on standard subplates without adapter blocks. A maximum operating pressure of 350 bar is permitted at ports P, A, and B, allowing the unit to control high-pressure lines. Maximum flow reaches 60 l/min in AC operation, giving adequate capacity for medium-speed actuators. The required oil cleanliness is ISO 4406 class 20/18/15 to protect the spool and seat surfaces from wear. Continuous duty at 100% ED ensures the solenoid can remain energized without thermal cycling. The coil is rated for 110 V AC at 50 or 60 Hz, and the initial switch-on power demand is 220 VA to establish magnetic force.
The electrical interface uses a 3-pin DIN EN 175301-803 connector marked K4, simplifying replacement in existing panels. Once pulled in, the solenoid maintains position with 50 VA holding power, reducing heat generation during long actuations. An IP65 rating, valid with the K4 connector installed, protects the housing from dust and water jets in typical plant environments. Port T may be exposed to 160 bar, so return lines can tolerate moderate back-pressure. The spool can cycle up to two times per second, the maximum switching frequency for AC coils. A concealed manual override, identified by code N9, lets technicians shift the spool during commissioning, and it tolerates tank pressures up to 50 bar while engaged. Positioning on a manifold is aided by an ISO 8752-3x8-St locating hole that aligns the body during assembly.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Duty Cycle
100% ED
Electrical Connection
DIN EN 175301-803, 3-pin (K4)
Holding Power
50 VA
Ip Rating
IP65 (K4)
Locating Hole
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Manual Override Max Tank Pressure
50 bar
Max Flow (ac)
60 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Pressure Port T (ac)
160 bar
Max Switching Frequency (ac)
2 1/s
Nominal Size
6
Porting Pattern
ISO 4401-03-02-0-05
Switch-on Power
220 VA
Voltage Rating
110 V AC (50/60 Hz)
1620 Old Apex Road
Shipping & Payment Options
