Bosch Rexroth | 4WE6X7-6XEW110N9DALB08V
4WE6X7-6X/EW110N9DAL/B08V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6X7-6X/EW110N9DAL/B08V directional spool valve belongs to the WE Directional Spool Valves series and is produced by Bosch Rexroth for routing pressure and return flow in hydraulic automation. It is driven by a 110 V AC solenoid suited to 50 or 60 Hz mains, while a voltage tolerance of ±10% maintains reliable shifting during supply fluctuations. At energization the coil draws 220 VA and then drops to a 50 VA holding power to limit steady-state heating. Continuous service is possible because the solenoid is rated for a 100 % duty cycle. Wiring passes through a 1/2-14 NPT cable gland that seals the electrical entry. A concealed manual override lets technicians move the spool without power during setup or fault finding, and an IP65 housing resists dust ingress and water jets encountered on open machinery.
The valve handles a maximum flow of 60 l/min, giving adequate capacity for medium-size cylinders and motors. Working ports a, b, and p tolerate 350 bar, whereas the tank port is limited to 160 bar, defining safe back-pressure conditions. A switching frequency of two cycles per second protects the coil from thermal stress during rapid commands. A 0.8 mm throttle insert in the p port dampens inlet surges to smooth actuator motion. Mounting follows the ISO 4401-03-02-0-05 pattern so it drops onto standard sub-plates without modification. Fluid sealing is handled by FKM elastomers that withstand many hydraulic oils and higher temperatures, supporting long service life in demanding installations.
Technical Specifications
Coil Voltage
110 V AC (50/60 Hz)
Duty Cycle
100% ED
Electrical Connection
Cable Gland 1/2-14 NPT
Holding Power
50 VA
Ingress Protection
IP65
Manual Override
Concealed
Max Flow (ac)
60 l/min
Max Operating Pressure (a/b/p)
350 bar
Max Switching Frequency (ac)
2 1/s
Max Tank Port Pressure (t, Ac)
160 bar
Porting Pattern
ISO 4401-03-02-0-05
Seal Material
FKM
Switch-on Power
220 VA
Throttle Insert (p Port)
0.8 mm
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
