Bosch Rexroth | 4WE6X6-6XEW110N9DALB0862
4WE6X6-6X/EW110N9DAL/B08/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6X6-6X/EW110N9DAL/B08/62 directional spool valve is produced by Bosch Rexroth for the WE Directional Spool Valves series. It switches hydraulic flow paths in NG6 circuits where automated actuators require quick, repeatable positioning. The valve follows the ISO 4401-03-02-0-05 porting pattern and fits a D03 mounting pattern, so it drops onto common subplates without adapter blocks. Its nominal size 6 passages accommodate flows up to 60 l/min, while a 0.8 mm throttle orifice in the P port dampens pressure spikes during shifting. Pressure limits reach 350 bar on the P, A, and B lines, and 160 bar on the tank port, enabling operation in high-pressure power units yet protecting the return line. Energizing the coil with 110 V AC at 50 or 60 Hz and a rated current of 0.39 A actuates the spool; a continuous 100 % ED duty cycle allows the solenoid to remain powered without overheating.
The DAL electrical connection uses a 1/2-14 NPT conduit entry, allowing standard industrial wiring, and the molded solenoid housing carries an IP65 enclosure rating to block dust and low-pressure water. An integrated indicator light shows coil energization, giving maintenance staff immediate visual confirmation of valve status. Class H insulation tolerates elevated winding temperatures, complementing the continuous duty rating described earlier. A concealed N9 manual override lets technicians shift the spool mechanically during setup or power loss without exposing the control to debris. Assembly is simplified by an ISO 8752-3x8-St locating hole that aligns the valve on the subplate before bolt tightening, which helps prevent port misregistration and seal damage. All these features combine to provide reliable service in automated hydraulic manifolds that demand precise, electrically actuated flow control.
Technical Specifications
Coil Voltage
110 V AC (50/60 Hz)
Duty Cycle
100% ED (S1)
Electrical Connection
DAL (1/2-14 NPT)
Enclosure Rating
IP65
Indicator Light
Yes
Insulation Class (ac)
H
Locating Hole
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (ac)
160 bar
Mounting Pattern (nfpa)
D03
Nominal Size
6 (NG6)
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (60 Hz)
0.39 A
Throttle Orifice (p Port)
0.8 mm
1620 Old Apex Road
Shipping & Payment Options
