Bosch Rexroth | 4WE6X48B6XEG24K4ZV
4WE6X48B6X/EG24K4/ZV
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6X48B6X/EG24K4/ZV valve is part of the WE Directional Spool Valves series manufactured by Bosch Rexroth to route hydraulic fluid in automated machinery. It is built to valve size 6 so it fits standardized manifolds in compact power units. A mounting pattern designated ISO 4401-03-02-0-05 and the corresponding NFPA D03 interface allow direct subplate installation. Four main ports handle pressure, tank, and two work lines within typical circuits. The solenoid uses a wet-pin design with a detachable coil, facilitating replacement while damping armature movement in oil. The coil operates at 24 V DC and draws a rated current of 1.25 A, enabling direct control from common PLC outputs. Electrical connection is made through a K4 plug conforming to DIN EN 175301-803. The valve can be mounted in any position, and a clamping length of 22 mm defines the screw engagement required for secure fastening.
The hydraulic section supports a maximum flow of 80 l/min, maintaining acceptable pressure drop for medium-duty actuators. System pressure may reach 350 bar, while the tank port is limited to 210 bar to protect return-side components. Coil insulation tolerates up to 500 V of switch-off overvoltage, preventing damage during rapid de-energization. An IP65 protection class guards internal parts against dust and low-pressure water jets when the connector is properly sealed. FKM seals withstand common hydraulic oils and many synthetic fluids, ensuring long-term leak-free operation. These ratings combine with the earlier dimensional features to provide consistent spool positioning and dependable directional control under demanding service conditions.
Technical Specifications
Clamping Length
22 mm
Coil Rated Current
1.25 A
Coil Voltage
24 V DC
Electrical Connector
K4 (DIN EN 175301-803)
Installation Position
Any
Main Ports
4
Max Flow (dc)
80 l/min
Max Operating Pressure
350 bar
Max Switch-off Overvoltage
500 V
Mounting Pattern
ISO 4401-03-02-0-05
Nfpa Mounting
D03
Protection Class
IP65
Seal Material
FKM
Solenoid Type
Wet-Pin, Detachable Coil
Tank Port Max Pressure (dc)
210 bar
Valve Size
6
1620 Old Apex Road
Shipping & Payment Options
