Bosch Rexroth | 4WE6W6XEW110N9DK25L62-AN
4WE6W6X/EW110N9DK25L/62 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6W6X/EW110N9DK25L/62 AN directional spool valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and directs pressurized fluid between actuator and tank lines in hydraulic automation. It uses spool symbol W to establish the flow paths required for reversing cylinder motion. The valve is built in size 6, providing a compact footprint for manifold mounting. An ANSI B93.9 porting pattern aligns the body with standard subplates so installation is straightforward. Four ports handle pressure supply, actuator lines, and return, supporting typical circuit layouts. Continuous service pressure can reach 350 bar at ports A, B, and P, while port T is rated for 160 bar to protect return plumbing. A maximum flow rate of 60 l/min allows the valve to serve medium-duty cylinders without excessive pressure drop. The enclosure carries an IP65 protection class to prevent dust ingress and low-pressure water jets in industrial environments. Overall mass is 1.95 kg, enabling easy handling during assembly.
Coil excitation is designed for a nominal 110 V AC supply at either 50 or 60 Hz so the valve suits common plant power systems. Initial energization requires 220 VA of switch-on power to shift the spool rapidly. Once magnetized, holding power falls to 50 VA to limit heat generation during continuous operation. The coil supports a 100% ED duty cycle, allowing it to remain energized indefinitely without thermal overload. Maximum surface temperature of the winding is limited to 120 °C to safeguard insulation integrity. Electrical connection is made through a DK25L five-pole plug, providing secure termination for power and ground conductors. Operators can actuate the N9 concealed manual override when electrical power is unavailable, ensuring serviceability during commissioning or fault diagnosis.
Technical Specifications
Coil Max Surface Temp
120°C
Duty Cycle
100% ED
Electrical Connection
DK25L (5-pole)
Holding Power
50 VA
Manual Override
N9 (Concealed)
Max Flow (ac)
60 l/min
Max Pressure At Port T (ac)
160 bar
Max Pressure At Ports A/b/p
350 bar
Nominal Voltage
110 V AC (50/60 Hz)
Number Of Ports
4
Porting Pattern
ANSI B93.9
Protection Class
IP65
Size
6
Spool Symbol
W
Switch-on Power
220 VA
Weight
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
