1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com
You will get an email confirming we have received your inquiry.
A team member will review your request and be in touch concerning any questions or specifications.
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6W6X/EG24N9K72LSO407 AN directional spool valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and functions as a flow-routing element in hydraulic automation. It is built in nominal size 6, allowing compact block installation. The subplate interface follows ISO 4401-03-02-0-05, so the unit fits standard manifolds without adaptation. Flow passages conform to the ANSI B93.9 porting pattern for consistent piping layouts. A 24 V DC coil shifts the spool while drawing a nominal 8 W, and the electromagnetic section can run continuously because the duty cycle is specified at 100 percent (S1). Coil surface temperature stability is maintained up to 85 °C, permitting use near warm reservoirs. Electrical insulation is grouped under VDE protection class III for extra-low-voltage circuits.
Wiring is completed through an M12×1 four-pin connector coded K72L, which enables quick exchange of the solenoid assembly. The housing carries an IP65 rating, giving resistance to dust and water jets during outdoor or wash-down service. A concealed N9 manual override allows direct spool actuation when power is absent. Hydraulic capacity reaches 60 l/min in direct-current operation for the SO407 version, serving medium-flow actuators. Ports A, B, and P tolerate 315 bar while the tank port withstands 210 bar back pressure without malfunction. Switching commands can be issued at up to two cycles per second, supporting rapid directional changes in servo loops.
Coil Voltage (dc)
24 V
Duty Cycle
100% (S1)
Electrical Connection
M12x1 4-Pin (K72L)
Ip Rating
IP65
Manual Override
N9 (Concealed)
Max Coil Surface Temp
85 °C
Max Flow (dc, So407)
60 l/min
Max Operating Pressure (a,b,p)
315 bar
Max Switching Frequency
2 1/s
Max Tank Port Pressure (dc)
210 bar
Mounting Interface
ISO 4401-03-02-0-05
Nominal Power (so407)
8 W
Nominal Size
6
Porting Pattern
ANSI B93.9
Vde Protection Class
III
Worldwide Shipping with FedEx and UPS.
We accept all major credit cards
1 year Hydraulic Parts USA warranty on ALL products
We are a Better Business Bureau A+ business