Bosch Rexroth | 4WE6W6XEG24N9DK35LSO407-AN
4WE6W6X/EG24N9DK35LSO407 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6W6X/EG24N9DK35LSO407 AN valve is manufactured by Bosch Rexroth within the WE Directional Spool Valves series. It directs hydraulic fluid in automated machinery where compact DIN size components are required. The valve size is 6, and the design incorporates four ports so that supply, return, and two work lines can be connected in a single body. A porting pattern that follows ANSI B93.9 matches standard subplates for straightforward mounting. The unit tolerates an operating pressure of 315 bar on ports P, A, and B, permitting use in high-pressure circuits. It passes up to 60 l/min, giving adequate flow for medium power cylinders or motors. The solenoid operates at 24 V DC and consumes a nominal 8 W, enabling low-power control electronics. A continuous duty cycle of 100 % (S1) supports uninterrupted actuation, and a two-solenoid assembly weighs 1.95 kg for easy handling during installation.
The enclosure carries an IP65 degree of protection, guarding internal components against dust ingress and water jets encountered in industrial environments. Electrical connection is made through an M12x1 four-pole plug coded DK35L, which simplifies wiring changes and supports detachable cable sets. A concealed manual override identified by code N9 lets technicians shift the spool without energizing the coil during commissioning or fault clearing. The coil surface may reach 85 °C without exceeding design limits, maintaining insulation integrity under sustained energization. Port T on the direct-current version withstands 210 bar, preventing damage when back-pressure rises in return lines. The maximum switching frequency of two cycles per second ensures reliable movement without excessive wear. NBR seals resist common hydraulic oils and maintain leakage control across temperature variations, completing the specification set required for dependable service in automated hydraulic manifolds.
Technical Specifications
Degree Of Protection
IP65
Duty Cycle
100% (S1)
Electrical Connection
M12x1 4-Pole (DK35L)
Manual Override
Concealed (N9)
Max Coil Surface Temperature
85 °C
Max Operating Pressure (p/a/b)
315 bar
Max Pressure Port T (dc)
210 bar
Max Switching Frequency
2 1/s
Maximum Flow (dc)
60 l/min
Nominal Power
8 W
Nominal Voltage
24 V DC
Number Of Ports
4
Porting Pattern
ANSI B93.9
Seal Material
NBR
Valve Size
6
Valve Weight (2 Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
