Bosch Rexroth | 4WE6W6XEG24N9DK24L62
4WE6W6X/EG24N9DK24L/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6W6X/EG24N9DK24L/62 directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series and is applied to switch hydraulic flow paths in automated machinery. Its solenoid is rated for 24 V DC, drawing 1.25 A at a nominal power of 30 W, so cabinet designers can size power supplies and wiring accordingly. A 100 % ED duty cycle permits continuous energization without sacrificing coil life. The M12 × 1 four-pin electrical connector offers a compact, keyed interface for quick field replacement. Protection class III under VDE 0580 provides reinforced insulation between the coil and control electronics, while the IP65 housing keeps dust and low-pressure water out of the coil cavity. A concealed manual override lets service staff shift the spool during commissioning yet stays recessed to avoid accidental actuation. Hydraulic fluid must meet ISO 4406 20/18/15 cleanliness to prevent spool sticking and seat wear.
The valve tolerates a maximum operating pressure of 350 bar on ports P, A, and B, allowing it to route high-pressure pump flow, and it withstands 210 bar on the T port so return lines can be moderately pressurized without risk. A maximum flow rate of 80 l/min ensures adequate volume for medium-size actuators. The subplate interface follows ISO 4401-03-02-0-05, and the NFPA T3.5.1 R2-2002 D03 pattern gives interchangeability with North American manifolds. A locating hole sized for an ISO 8752-3 × 8-St spring pin aligns the body precisely on the mounting surface to keep passageways sealed. Overall weight is 1.95 kg, enabling installation by a single technician. This modest mass also limits the load on the manifold surface during dynamic machine motion.
Technical Specifications
Cleanliness Class
ISO 4406 (c) 20/18/15
Duty Cycle
100% ED
Electrical Connector
M12x1 4-Pin
Ingress Protection
IP65
Locating Hole
Locking Pin ISO 8752-3x8-St
Manual Override
Concealed
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (dc)
210 bar
Mounting Pattern
ISO 4401-03-02-0-05
Nfpa Interface
T3.5.1 R2-2002 D03
Nominal Power
30 W
Nominal Voltage
24 V DC
Protection Class (vde 0580)
III
Rated Current (24 V Dc)
1.25 A
Weight
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
