Bosch Rexroth | 4WE6U6XEW110N9DALV62
4WE6U6X/EW110N9DAL/V/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6U6X/EW110N9DAL/V/62 directional valve belongs to the WE Directional Spool Valves series and is produced by Bosch Rexroth for hydraulic automation tasks such as switching actuator flow paths. It uses nominal size 6 to set the interface dimensions for compact manifolds. The porting pattern follows ISO 4401-03-02-0-05 so standard subplates accept the body without special machining. Spool symbol U defines the internal land geometry and therefore the possible flow directions during energization and de-energization. A maximum operating pressure of 350 bar on ports P, A, and B allows the unit to run in high-pressure circuits, while the tank port withstands up to 160 bar to handle elevated return pressures. The valve passes up to 60 l/min, giving adequate flow for medium-capacity cylinders or motors. HL, HLP, HLPD, HVLP, HVLPD, and HFDU fluids are supported, enabling use with mineral oils or water-glycol alternatives. FKM seals are fitted to maintain leakage control when these media and higher temperatures are present.
An integrated solenoid rated for 110 V AC at 50/60 Hz energizes the spool, and the corresponding current draw is limited to 0.39 A to reduce heat generation in control cabinets. The electrical connection is a central 1/2-14 NPT conduit entry, providing a single threaded port for wiring glands. IP65 ingress protection shields the coil and terminals from dust and low-pressure water jets in industrial wash-down zones. A concealed manual override permits local shifting without exposing moving parts to contamination. The required fluid cleanliness is ISO 4406 class 20/18/15, which safeguards the precision lands against accelerated wear. Positioning on the manifold is assisted by a locating hole conforming to ISO 8752-3x8-St, ensuring repeatable alignment during maintenance. The assembled unit weighs 2.2 kg, making installation manageable for one technician.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Coil Voltage
110 V AC 50/60 Hz
Electrical Connection
Central (1/2-14 NPT)
Hydraulic Fluid
HL, HLP, HLPD, HVLP, HVLPD, HFDU
Ingress Protection
IP65
Locating Hole
ISO 8752-3x8-St
Manual Override
Concealed
Max Flow (ac)
60 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (ac)
160 bar
Nominal Size
6
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (110 V 60 Hz)
0.39 A
Seals
FKM
Spool Symbol
U
Weight
2.2 kg
1620 Old Apex Road
Shipping & Payment Options
