Bosch Rexroth | 4WE6T6XEW110N9DK25L62
4WE6T6X/EW110N9DK25L/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6T6X/EW110N9DK25L/62 directional spool valve is manufactured by Bosch Rexroth in the WE Directional Spool Valves series and shifts hydraulic flow paths in automated circuits. The solenoid coil is wound for 110 V AC at 50 or 60 Hz, allowing direct connection to plant mains. A switch-on power of 220 VA supplies the magnetic force required to overcome initial spool friction, while the holding power drops to 50 VA to limit heat during steady state. Rated currents of 0.52 A at 50 Hz and 0.39 A at 60 Hz define conductor sizing for control wiring. Continuous service is supported by a 100 percent duty cycle so the valve can remain energized without cooldown intervals. The DK25L five-pole connector provides a quick electrical interface that maintains polarity and ground continuity. Nominal size 6 matches the ISO 03 subplate footprint, and the ISO 4401-03-02-0-05 (NFPA D03) porting pattern aligns the flow passages with standard manifolds.
The enclosure carries an IP65 rating to protect the coil and wiring against dust and water jets common in machine enclosures. Acceptable hydraulic fluid temperatures from −20 °C to +80 °C with NBR seals ensure reliable sealing in cold starts and warm running conditions. A viscosity window of 2.8 to 500 mm²/s lets the spool land tolerances accommodate thin or heavy oils without sticking. Maximum flow is 60 L/min so circuit designers can size pumps and lines accordingly. Pressure limits of 350 bar on the P, A, and B ports permit use in high-pressure supply and work lines, while the T port is restricted to 160 bar to safeguard the tank return passage. The dual-solenoid assembly weighs 1.95 kg, which simplifies mounting on manifolds without additional support brackets.
Technical Specifications
Coil Voltage (ac)
110 V (50/60 Hz)
Duty Cycle
100% ED
Electrical Connection
DK25L (5-pole)
Enclosure Rating
IP65
Holding Power (ac)
50 VA
Hydraulic Fluid Temp Range
−20 to +80 °C (NBR)
Max Flow (ac)
60 l/min
Max Operating Pressure (p,a,b)
350 bar
Max T Port Pressure (ac)
160 bar
Nominal Size
6
Porting Pattern
ISO 4401-03-02-0-05 (NFPA D03)
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Switch-on Power (ac)
220 VA
Viscosity Range
2.8 to 500 mm²/s
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
